Flowserve HEGA Between Bearings PumpThe HEGA, an incredibly robust and well-proven ring section pump with closed impellers, can be used in power, water, wastewater, pharmaceutical, and chemical applications requiring the trouble-free pumping of clear or slightly filthy liquids.
Related Industries:
Size Range: 25, 32, 40, 50, 65, 80
The Product Line of Flowserve Pumps
Discover the reliable Flowserve HEGA Between Bearings Pump for your industrial needs. Contact us today to learn more and enhance your operations!
Flowserve HED/HED-DS Between Bearings Pumps – Radially Split, Single CaseHydrocarbon processing, power generation, and specialized service applications are just a few examples of the high-temperature process areas that benefit greatly from the HED/HED-DS Between Bearings Pumps. The performance of this class of pumps falls somewhere in the middle of that of single-stage HDX pumps and multistage, double-case pumps.
The first-stage impellers of these pumps can be configured with either one or two suction ports. They are more dependable and long-lasting because of their heavy-duty casings and staggered construction.
HED/HED-DS Between Bearings Pumps meet the standards set out by ISO 13709 and API 610 (BB2). In terms of design, the pumps are suitable for use in the hydrocarbon processing and power generation sectors. The following requirements are part of the specifications: bearing alternatives, material choices, centerline-mounted casing, mechanical seal chambers, nozzle loads and shaft run-out requirements under ISO 13709/API 610, and ISO 21049/API 682.
Double casing covers can be used to make maintenance easier.
When working with hot liquids, it is critical to use gasketing, which is a metal-to-metal fit that is completely confined and compressed under control, to ensure proper sealing and alignment.
For the most difficult applications, the ISO 21049/API 682 Seal Chamber can handle both pressurized and unpressurized cartridge seals. You have access to a complete set of seal flush plans that meet ISO 13709 and API 610 requirements. A pressure equalizing line is connected to the chamber on the discharge side to maintain consistent pressures in the seal chambers.
Class 600 Raised Face Flanges are ASME B16.5 compliant. The surface is smooth and meets the ISO 13709 and API 610 standards. Flanges of class 300 and 900 can be ordered if required.
Threaded dowels or locking pins are used to secure the wear rings on the impeller and regenerative casing. Wear rings are an inexpensive technique to improve the pump’s function and keep it running smoothly. Optional non-metallic wear rings come in a variety of exotic materials, including PEEK.
By carefully fitting the seal face, you can ensure easy maintenance and a long seal life.
ISO 13709 / API 610 BB2
Size Range: 2″ to 12″
Type HED and HED-DS pumps may be used with many other Flowserve pump designs, including:
Enhance your industrial operations with the robust and reliable Flowserve HED/HED-DS Between Bearings Pumps. Contact us today for expert guidance and solutions tailored to your needs.
Worthington HDXN Between Bearings Pumps-Radially Split, Single CaseA double suction, single-stage pump engineered and constructed for process service.
ISO13709 / API610 (BB2)
Flows to: 3200 m3/h (14080gpm)
Heads to: 470 m (1542 ft)
Pressures to: 44 bar (639 psi)
Temperatures to: 430°C (806°F)
Size Range: 4 to 16 inch
Pressure Class Range: Pressure to 44 bar ( 639psi)
Seating Material:
Are you ready to increase your industrial output? The Worthington HDXN Between Bearings Pumps is built to withstand extreme circumstances, ensuring dependability and efficiency. Get in touch right now to optimize your procedures.
Flowserve HPX-Mag API Process PumpThe HPX-Mag sealless pump is designed on the renowned Flowserve HPX API 610 process pump. This horizontal, overhung, single-stage, radially split, end-suction, top discharge, centerline mounted pump features high-efficiency magnetic coupling. This versatile pump, which is commonly used in the oil and gas and hydrocarbon industries, provides excellent leakage prevention and can withstand high pressures, temperatures and hostile/toxic fluids. The HPX-Mag magnetic drive pump perfectly meets API 685 requirements.
High-efficiency magnetic coupling drives the horizontal, overhung, single-stage, radially split, end suction, top-discharge, centerline placed HPX-Mag pump.
Based on the established hydraulic design of the Flowserve HPX API 610 pump, it offers the following performance-boosting characteristics:
Renewable casing and impeller wear rings contribute to lower replacement parts costs. Wear rings are held together with set screws or tack welds.
HPX-Mag Magnetic Drive Process Pump Brochure
HPX-Mag Magnetic Drive Process Pump Flyer
Transform your operations with the Flowserve HPX-Mag API Process Pump. Contact us now for expert guidance and tailored solutions.
HPX-V API Process PumpThe HPX-V vertical inline process pump allows you to make a space while maintaining performance. Its rugged ISO 13709/API 610 (OH3) design and small dimensions make it ideal for high-pressure, high-temperature applications in which installation space is limited. It is designed to continuously withstand the harsh operating conditions seen in the oil and gas and hydrocarbon industries.
The HPX-V pump is based on the well-known Flowserve HPX horizontal process pump, which has the same shaft diameter and impeller as the HPX. This allows you to standardize seals and impellers across multiple pump lines, resulting in decreased spare part inventory.
• Flows to 1200 m3/h (5200 gpm)
• Heads to 325 m (1070 ft)
• Standard pressures to 42 bar (600 psi)
• Temperatures from -40°C to 400°C (-40°F to 750°F)
Size range: From 1.5HPX6A-V (smallest) to 10HPX21A-V (largest)
Standard pressures to: 42 bar (600 psi)
API material classes: S6, S8, C6, A8, D1, D2
The HPX-V vertical in-line process pump is designed to handle high pressures and temperatures common in the oil, gas and hydrocarbon industries.
The HPX-V pump has identical impeller, wear rings and bearings as the HPX horizontal pump. It maintains the same shaft diameter under its seal. Standardizing parts across pump lines can save spare parts inventory.
Ready to enhance your operations? Contact us today to learn more or request a quote for the Flowserve HPX-V API Process Pump!
Worthington HNN API Process PumpThe Worthington HNN API Process Pump is a high-performance centrifugal pump that has been precisely built to withstand the rigors of modern industrial processes. This pump is designed in strict accordance with the most recent API 610 standards, creating a benchmark for dependability, safety, and performance. Its robust design and complex functions make it indispensable in vital industries like as oil and gas, chemical processing, and power generation.
Centerline: The robust duty design ensures optimal performance at high temperatures and pressures and provides maximum interchangeability and optional inducer for low NPSH application.
ISO13709 / API610 (OH2)
Flows to: 1200 m3/h (5280gpm)
Heads to: 320 m (1050 ft)
Pressures to: 41 bar (596 psi)
Temperatures to: 455°C (851°F)
Size Range: 1.5 to 16 inch
Pressure Class Range: Pressure to 41 bar ( 596 psi)
Seating Material:
Optional
INNOMAG U-MAG Fluoropolymer-Lined Magnetic Drive PumpApplications related to the most demanding industrial performances required by many industry rely on the INNOMAG U-MAG Fluoropolymer-Lined Magnetic Drive Pump to ensure the best results. Technologically superior, its robust fluoropolymer finishing distinguishes it in performance, dependability, durability, and productivity, lowering maintenance costs.
The pump’s lining is made of fluoropolymer, which provides maximum corrosion resistance against even the most aggressive substances. The leak-free magnetic drive design allows operators to use the pump safely and free of contaminants. Additionally, considering energy efficiency is intended to assist businesses save operating costs. The back pullout design allows for easy maintenance, which results in significantly less time spent servicing.
• Flows to 102 m³/h (450 gpm)
• Heads to 50 m (165 ft)
• Pressures to 17 bar (250 psi)
• Temperatures from -29°C to 121°C (-20°F to 250°F)
• Power range from 0.75 kW to 10.5 kW (1 hp to 14 hp)
Size Range: DN25 to 65, 1 in to 2.5 in
Pressure Class Range: PN17
From chemical processing to pharmaceutical industries, even in water management-the INNOMAG UMAG Fluoropolymer Lined Magnetic Drive Pump offers an assurance of reliability and the required efficiency for industrial application.
Contact us today to discuss your needs!
Flowserve FP Industrial Process PumpsThe FP series of industrial process pumps is designed for high performance and reliability in various industrial applications. With robust construction, they offer efficient operations and long-lasting durability, making them ideal for power generation, water management, and manufacturing.
The product features a back pullout design for easy maintenance, a multistage arrangement for improved hydraulic efficiency, high performance, and a modular platform for horizontal and vertical setups.
Size Range: 50, 65, 80, 100, 125
FP Industrial Process Pump application eliminates time wastage and reduces maintenance burdens. For more information on which Industrial Process Pumps best suit your company’s needs, contact us today.
FRBHJ Overhung, Vertical Lineshaft Sump Pump| Brand: | Worthington |
|---|---|
| Description: | The FRBHJ vertical lineshaft sump pump is suitable for to handle the thick, pulpy mixtures found in the pulp and paper industry,… |
The FRBHJ vertical lineshaft sump pump is suitable for to handle the thick, pulpy mixtures found in the pulp and paper industry, as well as a broad range of process liquids in many other industries.
Steep Head-Capacity Curve minimizes changes in flow regardless of changes in system head and prevents overloading the driver.
Semi-Open, Full Vane Impeller with back pump-out vanes prevents clogging in thick, pulpy applications and reduces axial unbalance and stuffing box pressure.
Cast Iron Lower Bearing Housing is fitted with a rubber or urethane fluted bearing. The bearing is contained in a rigid stainless steel shell and lubricated from an external clear liquid source.
Stuffing Box is sized for five rings of packing with multiple lantern ring positions. Single, double, tandem, and split mechanical sealing options also available.
Features:
Features:
Flowserve FRBH Worthington® Heavy-Duty Paper Stock and Process Pump
Installation, Operation, & Maintenance for FRBH, FRBHX & FRBHS Centrifugal Paper Stock and Process Pumps (Incorporating 216OH-EI)
Installation, Operation, & Maintenance for FRBHJC Vertical Cantilever Centrifugal Pumps
R Radially Split, Rubber Lined Overhung Slurry Pump| Brand: | Worthington |
|---|---|
| Description: | The type R rubber lined slurry pump is a horizontal, single stage, end suction design with a tangential discharge nozzle.… |
The type R rubber lined slurry pump is a horizontal, single stage, end suction design with a tangential discharge nozzle. Engineered to handle high concentrations of fine abrasive solids in suspension or corrosive and abrasive mixtures, the type R is a workhorse in the mining and metal processing industries.
Casing halves are cast iron fitted with replaceable, abrasion resistant rubber liners, which are pressure molded to steel backing plates and secured to casing externally by heavy duty studs and nuts.
Rubber Closed Impeller is pressure molded to ductile iron skeleton and includes pump-out vanes on front and rear shroud to reduce stuffing box pressure and suction recirculation.
Standard Packing Type Stuffing Box is protected by replaceable wear plate and is drilled and tapped for L5 and 2L3 lantern ring positions. Provided with full and low flow flush connections.
Heavy-Duty Bearing Frame is generously sized to handle belt loads and has ample access to facilitate maintenance. Oil lubrication is standard; grease lubrication is optional.
Features:
Operating Parameters
Flowserve Type R Rubber-Lined Slurry Pump
Flowserve Type R and RX Centrifugal Rubber Lined Slurry Pumps – User Instructions: Installation, Operation, Maintenance (Incorporating 2162-EID)
M Hard Metal, Overhung Abrasive Slurry Pump| Brand: | Worthington |
|---|---|
| Description: | The Flowserve type M hard metal slurry pump is a horizontal, single stage, end suction design with a tangential discharge… |
The Flowserve type M hard metal slurry pump is a horizontal, single stage, end suction design with a tangential discharge nozzle. Fitted with a hard metal liquid end, the M pump is engineered to handle high concentrations of coarse, abrasive solids in suspension.
Closed impeller with external pumping vanes on front and rear shrouds reduces stuffing box pressure and suction recirculation while sweeping away solids.
Heavy-duty bearing frame is generously sized to handle belt loads.
Hook sleeve and replaceable metallic impeller spacer have gasket seals to isolate shaft and impeller threads from slurry and to ease impeller removal.
Hard metal casing is free from cavities or other obstructions that cause wear.
Operating Parameters
Flowserve M Pump Quick Ship Program Slurry Pumps Bulletin
Installation, Operation, & Maintenance Instructions for Vertical Wet Pit
The Flowserve GR series, double-helical, herringbone type gear pumps have long been a workhorse of the general industry. Designed to handle viscous fluids, these rugged pumps provide high efficiency, pulse-free pumping over a wide spectrum of applications.
GR Double Helical, Rotary Gear Pump| Brand: | Worthington |
|---|---|
| Description: | The Flowserve GR series, double-helical, herringbone type gear pumps have long been a workhorse of the general industry.… |
The Flowserve GR series, double-helical, herringbone type gear pumps have long been a workhorse of the general industry. Designed to handle viscous fluids, these rugged pumps provide high efficiency, pulse-free pumping over a wide spectrum of applications.
Double Helical Herringbone Gears provide quiet, pulsation-free flow with better load carrying ability, greater strength and minimum hydraulic shock.
High Speed Pump Capability eliminates need for expensive speed reduction accessories and allows the use of off-the-shelf motors.
Between Bearing Design virtually eliminates shaft deflection, even while accommodating heavy, highly viscous loads.
Inherently Hydraulically Balanced Design eliminates end thrust and the need for thrust bearings.
Convertible Stuffing Box allows for ample packing or mechanical seals to be used for greater flexibility.
Features:
Flowserve Gear Pumps – Between Bearings, Herringbone Gear Designs – GA – GR – Gearex
WX Between Bearings, Single Case, Radially Split, Multistage, Ring Section Pump| Brand: | Worthington |
|---|---|
| Description: | Available in various sizes, hydraulics and material combinations, the WX is well suited for a wide range of applications.… |
Available in various sizes, hydraulics and material combinations, the WX is well suited for a wide range of applications. It is designed to provide reliable, efficient performance with total life cycle cost economy.
Separate cast diffusers and channel rings are investment cast for optimum efficiency and repeatability of hydraulic performance.
Impellers are individually balanced to optimize performance.
Centerline Mounted, Self-Venting Casing maintains resists distortion due to thermal expansion.
Discharge and Suction Heads are designed for the maximum allowable working pressure.
Standard Flanged Balance Drum or optional straight balance drum is available to suit the application. Running clearances are serrated to reduce drum leakage and optimize efficiency.
Carbon Steel Bearing Housing is flanged to the pump casing and provides enough space for mechanical seals according to API 682.
Operating Parameters
Installation, Operation, and Maintenance Instructions for Horizontal, Multistage Pumps
WTB Between Bearings, Two- and Three-Stage, Radially Split Process Pump| Brand: | Worthington |
|---|---|
| Description: | The WTB pump is a between bearings, radially split, volute type process pump engineered to provide safe, reliable operation… |
The WTB pump is a between bearings, radially split, volute type process pump engineered to provide safe, reliable operation at elevated temperatures and pressures. The two-stage WTB is fully compliant with ISO 13709/API 610 (BB2). The three-stage WTB meets all the key ISO13709/API 610 (BB2) requirements.
Heavy-Duty, Dual Volute Casing With an Integral Crossover ensures radial hydraulic balance and stable performance over the pump’s full operating range. Shaft deflection and vibration are virtually eliminated.
Centerline Supported, Radially Split Design prevents distortion at high temperatures and pressures. Fully confined gasket fits provide superior sealing versus horizontally split case pumps.
Dynamically Balanced Impellers ensure hydraulic efficiency and are positively locked to the shaft to eliminate vibration.
Double-Suction First-stage Impeller minimizes axial thrust and significantly reduces NPSHR, often eliminating the need for booster units.
Rotor Hydraulic Balance is achieved by using an inherently hydraulically balanced double-suction impeller in tandem with second- and third-stage impellers with balance holes.
ISO 21049/API 682 Seal Chamber accommodates a wide variety of seal configurations.
Operating Parameters
Flowserve WTB Pumps – Between Bearings, Two- and Three-Stage, Radially Split Process Pump – ISO 13709/API 610 (BB2)
BP ISO 13709/API 610 (BB5) Diffuser Casing, Multistage, Process Barrel Pump| Brand: | Worthington |
|---|---|
| Description: | Fully compliant with the latest edition of ISO 13709/API 610 (BB5), the BP is a diffuser style pump that is well-suited for… |
Fully compliant with the latest edition of ISO 13709/API 610 (BB5), the BP is a diffuser style pump that is well-suited for high temperature and high pressure services. In particular, it is ideal for boiler feed, descaling, decoking and reactor charge applications.
Optimized Multi-Vane Diffuser and Channel Ring Design results in balanced radial loads and precise hydraulic performance over the entire flow range, including partial-load operation.
Tandem Impeller Design increases rotor stability and facilitates maintenance by permitting replacement of a single casing stage.
Dynamically Balanced Impellers are precision cast to improve hydraulic efficiency and performance repeatability.
Straight Style Balance Drum simplifies assembly since no axial setting is required.
Operating Parameters
Installation, Operation and Maintenance Instructions for Multi-stage, horizontal, barrel pumps
V3, VQE and VSE Vertical Reciprocating Pumps| Brand: | Aldrich, Worthington |
|---|---|
| Description: | The VTE, VQE, VSE and 9V Series of reciprocating pumps are vertical multiplunger types. Designed with flexibility in mind,… |
The VTE, VQE, VSE and 9V Series of reciprocating pumps are vertical multiplunger types. Designed with flexibility in mind, they are available in multiple fluid-end designs and materials making them compatible with a wide variety of industrial applications.
Self-Aligning Plunger connection ensures proper concentricity within the stuffing box.
Valve Assemblies are independent of and clamped between manifolds and liquid cylinders.
Stuffing Box Assemblies are individually bolted to the liquid cylinder permitting easy accessibility and maintenance.
Three Lip Type Seals at each horizontal crosshead extension provide oil sealing and protection against wear.
Independent Crosshead Extension Rods provide easy access to the crankcase oil seals without excessive pump disassembly.
Self-Aligning Plunger connection ensures proper concentricity within the stuffing box.
Valve Assemblies are independent of and clamped between manifolds and liquid cylinders.
Stuffing Box Assemblies are individually bolted to the liquid cylinder permitting easy accessibility and maintenance.
Three Lip Type Seals at each horizontal crosshead extension provide oil sealing and protection against wear.
Independent Crosshead Extension Rods provide easy access to the crankcase oil seals without excessive pump disassembly.
Operating Parameters
HS and YHT Multiplunger, Horizontal Reciprocating Pumps| Brand: | Worthington, Aldrich |
|---|---|
| Description: | The Flowserve HS and YHT reciprocating pumps are horizontal multiplunger designs, engineered with a high degree of flexibility.… |
The Flowserve HS and YHT reciprocating pumps are horizontal multiplunger designs, engineered with a high degree of flexibility. The HS and YHT are available with multiple wet end designs and in numerous materials of construction, making them compatible with a wide variety of industrial applications.
Totally Enclosed Power End, protected from the liquid end by adjustable liquid end packing, ample sized cradle with drain connection, plunger slingers and power end seals, assures trouble-free operation.
Solid Power Transmission from forged steel crankshaft ensures the highest reliability. Optional either-side shaft extension is available via sturdy connecting rods and extra large cylindrical crossheads-to-plunger adaptors.
Plungers and Stuffing Boxes combined into a cartridge allow quick removal for service and simple adjustment for changed operating conditions.
Foolproof Splash Type Oil System gives correct lubrication at all times. An indicator shows oil level at a glance.
Self-Contained Cartridge Type Valves permit easy maintenance.
Suction and Discharge Connections may be located on either side, simplifying installation layout.
Operating Parameters
Flowserve Pumps for Pipeline Transportation – Crude Oil and Refined Products – Water – Slurry
Flowserve Pumps for Oil & Gas – Upstream and Pipeline – Offshore – Onshore – Synthetic Crude and LNG
Flowserve Reciprocating Pumps – Horizontal and Vertical Multi-Plunger Configurations (HS, YHT,VTE,VQE,VSE,and 9V)
Flowserve Mining and Mineral Processing Pumps- Beneficiation – Hydrometallurgy – Refining
LNNV Between Bearing, Axially Split, Single Stage Pump| Brand: | Worthington |
|---|---|
| Description: | The Flowserve LNNV is an axially split, double suction pump and is vertically mounted with in-line suction and discharge… |
The Flowserve LNNV is an axially split, double suction pump and is vertically mounted with in-line suction and discharge for space-saving flexibility. Featuring 145 impeller and volute combinations the LNNV provides quiet, efficient operation and low NPSH requirements in all water applications.
Double Suction Impeller and Heavy-Duty Double Volute Casing inherently result in optimum axial and radial thrust balance over the full operating range.
Hydraulically Balanced Double Suction Impeller reduces NPSH requirements and ensures smooth, efficient operation over a wide range of conditions.
Dynamically Balanced Impellers meet ISO 1940 tolerances.
Independent Cast Seal Chamber accommodates packing or mechanical seal.
Shaft is conservatively designed to minimize deflection and reduce maintenance costs caused by wear.
Features:
Installation, Operation, & Maintenance instructions for LNN, LNNV and LNNC Centrifugal Pumps – Single stage, double suction, horizontally split, volute type centrifugal pumps (Based on C953KH001)
LNNC Between Bearing, Axially Split, Single Stage Pump| Brand: | Worthington |
|---|---|
| Description: | The Flowserve LNNC is an axially split, double suction pump and is horizontally mounted with bottom suction and side discharge… |
Double Suction Impeller and Heavy-Duty Double Volute Casing inherently result in optimum axial and radial thrust balance over the full operating range.
Hydraulically Balanced Double Suction Impeller reduces NPSH requirements and ensures smooth, efficient operation over a wide range of conditions.
Dynamically Balanced Impellers meet ISO 1940 tolerances.
Independent Cast Seal Chamber accommodates packing or mechanical seal.
Shaft is conservatively designed to minimize deflection and reduce maintenance costs caused by wear.
Features:
Installation, Operation, & Maintenance instructions for LNN, LNNV and LNNC Centrifugal Pumps – Single stage, double suction, horizontally split, volute type centrifugal pumps (Based on C953KH001)
LNN Between Bearings, Axially Split, Single Stage Pump| Brand: | Worthington |
|---|---|
| Description: | The Flowserve LNN is an axially split, double suction pump design featuring 145 impeller and volute combinations resulting… |
The Flowserve LNN is an axially split, double suction pump design featuring 145 impeller and volute combinations resulting in quiet operation, low NPSH requirements, and high efficiency operation in all water applications.
Double Suction Impeller and Heavy-Duty Double Volute Casing inherently result in optimum axial and radial thrust balance over the full operating range.
Hydraulically Balanced Double Suction Impeller reduces NPSH requirements and ensures smooth, efficient operation over a wide range of conditions.
Dynamically Balanced Impellers to ISO 1940 tolerances.
Independent Cast Seal Chamber housing for packing or mechanical seal.
Shaft conservatively designed to minimize deflection and reduce maintenance costs caused by wear.
Features:
Operating Parameters
Installation, Operation, & Maintenance instructions for LNN, LNNV and LNNC Centrifugal Pumps – Single stage, double suction, horizontally split, volute type centrifugal pumps (Based on C953KH001)
Gearex Double Helical, Timed Rotary Gear Pump| Brand: | Worthington |
|---|---|
| Description: | The Flowserve Gearex double-helical, rotary gear pump is extremely rugged and unusually compact for its high capacity and… |
The Flowserve Gearex double-helical, rotary gear pump is extremely rugged and unusually compact for its high capacity and range. Timing-gear-driven herringbone rotors are precision machined for vibrationless, pulseless discharge of viscous fluids.
Double Helical Herringbone Gears provide quiet, pulse-free flow with better load carrying ability, greater strength and minimum hydraulic shock.
Timing Gears drive and transmit power, eliminating metallic contact of the pumping rotors and promoting long pump life.
Between Bearing Design virtually eliminates shaft deflection, even while accommodating heavy, highly viscous loads.
Heavy-Duty, Double Row Roller Bearings capable of carrying high radial loads, a short bearing span, and a husky shaft minimize rotor deflection.
Installation, Operation, & Maintenance for Gearex Rotary Gear Pumps External and Internal Bearing Design (Incorporates 2167B-E1)
GA Series Cast Iron, Double Helical, Rotary Gear Pumps| Brand: | Worthington |
|---|---|
| Description: | The Flowserve GA cast iron series, double helical, herringbone type gear pumps are designed to handle viscous fluids at low… |
The Flowserve GA cast iron series, double helical, herringbone type gear pumps are designed to handle viscous fluids at low to medium flows and pressures. These rugged pumps provide highly efficient, pulse-free pumping even under the most challenging conditions.
Double Helical Herringbone Gears provide quiet, pulse-free flow with better load carrying ability, greater strength and minimum hydraulic shock.
High-Speed Pump Capability eliminates the need for expensive speed reduction accessories and allows the use of off-the-shelf motors.
Between Bearings Design virtually eliminates shaft deflection, even while accommodating heavy, highly viscous loads.
Standard Babbitted Carbon Sleeve Bearings are self-lubricated for handling low viscosity fluids. Bronze bearings are available for dirty fluid applications.
Inherently Hydraulically Balanced Design eliminates end thrust and the need for thrust bearings.
Convertible Stuffing Box allows for ample packing or mechanical seals to be used for greater flexibility.
Features:
Flowserve Pumps for Pulp and Paper – Pulp Production, Chemical Recovery, Paper Stock Preparation, Paper Manufacturing, Mill and Environmental Services
Flowserve Gear Pumps – Between Bearings, Herringbone Gear Designs – GA – GR – Gearex
HWX API 610 (OH3), Overhung, Vertical In-Line Pump| Brand: | Byron Jackson, IDP, Worthington, United Centrifugal, Wilson-Snyder, Pacific |
|---|---|
| Description: | The Flowserve HWX pump is a vertical, in-line design, fully compliant with API 610 (OH3), latest edition. This pump offers… |
The Flowserve HWX pump is a vertical, in-line design, fully compliant with API 610 (OH3), latest edition. This pump offers a space-saving alternative for many overhung process pumps in upstream and downstream services, including cryogenic, high temperature, and high working pressure services.
Space Saving Design engineered for safe, reliable performance in cryogenic, high temperature and high working pressure services.
API 682 Seal Chamber accommodates a wide variety of seal configurations including dual pressurized and unpressurized cartridge types for the most severe services. A full complement of API 610 seal flush plans is available.
Stiff Shaft Design limits maximum deflection at seal faces to 0.05 mm (0.002 in). Shaft stiffness factors (L3/D4) are best in the industry.
Dynamically Balanced Impeller limits vibration and ensures smooth operation over wide flow range.
Accommodates NEMA, IEC and existing field drivers (C-face and P-base).
Features:
Installation, Operation, and Maintenance for Vertical single stage, single suction, radially split volute type centrifugal pumps
Flowserve HWX API 610 Vertical In-Line Process Pumps – API OH3 Pump Bearing Frame, API OH4 Rigidly Coupled, API OH5 Close Coupled
DS Overhung, Double Volute, End Suction Industrial Process Pump| Brand: | Argus, Worthington |
|---|---|
| Description: | This versatile end-suction pump features a double volute configuration that greatly reduces radial forces and produces a… |
This versatile end-suction pump features a double volute configuration that greatly reduces radial forces and produces a higher efficiency over the full range of the head-capacity curve than single volute counterparts.
Mechanically balanced, radial flow impeller includes balance holes to minimize axial thrust.
Seal chamber accommodates a wide choice of sealing arrangements from packing to mechanical seal types.
Angular contact thrust bearing and parallel roller radial bearing design provides excellent shaft-impeller support. Grease lubrication is standard with optional oil lubrication.
Back pullout design facilitates maintenance.
Optional configurations include a vertical model, directional discharge (90° on right or left) and centerline mounted.
Operating Parameters
Installation, Operation, and Maintenance instructions for Single-stage, horizontal end suction, double volute type centrifugal pumps
FRBH Heavy-Duty Paper Stock and Process Overhung Slurry and Solids Handling Pump| Brand: | Worthington |
|---|---|
| Description: | The FRBH is one of the world’s most efficient and reliable pumps Able to perform effectively across a broad operating range,… |
The FRBH is one of the world’s most efficient and reliable pumps Able to perform effectively across a broad operating range, the high efficiency of the FRBH translates into low total cost of ownership.
Self-Venting, Top Centerline Discharge Casing eliminates pump rotation as a factor in piping arrangements.
Semi-Open, Full Vane Impeller with back pump-out vanes prevents clogging in thick, pulpy applications and reduces axial unbalance and stuffing box pressure.
Large Suction Inlet facilitates inflow of stock, minimizes clogging and prevents stock separation or dewatering.
Stuffing Box is sized for five rings of packing with multiple lantern ring positions. Single, double, tandem and split mechanical sealing options also available.
Features:
Operating Parameters
Installation, Operation, & Maintenance for FRBHJC Vertical Cantilever Centrifugal Pumps
Installation, Operation, & Maintenance for FRBH, FRBHX & FRBHS Centrifugal Paper Stock and Process Pumps (Incorporating 216OH-EI)
WD and WDX Between Bearings, Single Case, Radially Split, Multistage, Ring Section| Brand: | Worthington |
|---|---|
| Description: | WD and WDX are radially split, high-pressure, multistage, ring section pumps designed for a wide range of process and industrial… |
WD and WDX are radially split, high-pressure, multistage, ring section pumps designed for a wide range of process and industrial applications.
Pump Casings (suction, discharge and stage) are sealed with O-rings and designed to contain the pressures generated by the pump at the various possible design pressures and temperatures.
Fully Shrouded Impeller may be fitted with optional wear rings. The suction impeller is specifically designed to have a low NPSH requirement.
The diffusers are fully machined to optimize performance.
Antifriction Bearings may be either oil or grease lubricated. Bearing isolators or stationary labyrinths are available.
Stuffing boxes have been designed for component or cartridge seals. Gland packing may be fitted as an option.
Modular Construction features identical stages stacked axially to achieve the desired pressure output. Four high-strength external tie rods connect the two end casings.
Operating Parameters
Flowserve WDX Centrifugal Pumps – User Instructions: Installation, Operation, Maintenance
NM Between Bearings, Single Case, Radially Split, Multistage, Ring Section Pump| Brand: | Worthington |
|---|---|
| Description: | The NM is a radially split, multistage, ring section pump designed for a wide range of process and industrial applications. |
The NM is a radially split, multistage, ring section pump designed for a wide range of process and industrial applications.
Low NPSH suction volute design.
Machined impeller shrouds for increased efficiency.
Impeller balance holes minimize axial thrust.
Shrouded diffusers with return guide vanes minimize radial thrust.
Operating Parameters
Installation, Operation and Maintenance instructions for Multi-stage, single suction and radial joint plan pump type centrifugal pumps
FRBHJC Overhung Cantilever Sump Pump| Brand: | Worthington |
|---|---|
| Description: | The FRBHJC is a true stiff-shaft vertical cantilever design developed to handle the thick, pulpy mixtures found in the pulp… |
The FRBHJC is a true stiff-shaft vertical cantilever design developed to handle the thick, pulpy mixtures found in the pulp and paper industry, as well as numerous other industries, particularly when flushing liquids are not available or cannot be tolerated.
Steep Head-Capacity Curve minimizes changes in flow regardless of changes in system head and prevents overloading the driver.
Semi-Open, Full Vane Impeller with back pump-out vanes prevents clogging in thick, pulpy applications and reduces axial unbalance and stuffing box pressure.
True Stiff-Shaft Cantilever Design eliminates submerged bearings and their associated flush water systems.
Stuffing Box is sized for five rings of packing with multiple lantern ring positions. Single, double, tandem, and split mechanical sealing options also available.
Features:
Operating parameters
Installation, Operation, & Maintenance for FRBHJC Vertical Cantilever Centrifugal Pumps
Installation, Operation, & Maintenance for FRBH, FRBHX & FRBHS Centrifugal Paper Stock and Process Pumps (Incorporating 216OH-EI)
D800 Series General Industry Pumps
Brand |
Description |
| Worthington | The Flowserve D800 Series Pump is engineered to meet the growing demand for reliable and economical pumps in general industrial service. Designed with flexibility and efficiency in mind, the D800 series offers a wide range of flow and head capabilities, making it an ideal choice for diverse applications across various industries. Whether for water management, food and beverage processing, or general industrial use, the D800 Series Pump delivers exceptional performance, ease of maintenance, and long-lasting durability. |
Covering a large flow and head range, the D800 is versatile and reliable. It is available in multiple configurations to suit site requirements and incorporates many proven features to reduce and facilitate maintenance.
Precision Dry-Rabbet Fit with one-piece adapter and seal cover ensures positive alignment and reduces maintenance downtime.
Top Centerline Discharge Casing has bottom foot for added support; tap and plug holes for drain connections can also be provided.
Precision Cast High-Efficiency Closed Impeller is statically and hydraulically balanced to reduce power consumption.
Casing Nozzles conform to ANSI B16.1 specifications with a minimum 125 pound load rating. Threaded or flat-face flanged.
Complete Mechanical Seal Assembly is pre-set on the shaft sleeve to ease assembly and reduce maintenance downtime.
Renewable Wear Rings and Shaft Sleeves restore worn operating clearances and extend pump life at minimal cost.
Flexible Spacer Type Coupling allows pump internals to be removed without disconnecting motor leads or system piping.
Operating Parameters
The WXB is a multistage, diffuser-casing barrel pump with tandem impellers and a balance drum to carry axial thrust forces. It is designed for users who need the hydraulic range and performance of a ring section pump, but demand the design and maintenance attributes of a barrel pump. Radially Split, Multivane Diffuser Construction results in balanced radial loads over the entire flow range, including partial-load operation. Cartridge-Style Inner Case Sub-Assembly includes the rotor, discharge head, suction head and bearing assembly. This cartridge-style construction allows the entire assembly to be removed as a single unit to facilitate maintenance. Axial Thrust Balancing Device creates nearly constant axial thrust throughout the pump’s operating range for improved efficiency. Precision Cast Impellers are dynamically balanced to ensure hydraulic efficiency and performance repeatability. Large-eye first stage impeller optimizes NPSH characteristics. Radial Bearings are sleeve mounted anti-friction deep groove and thrust bearings are sleeve mounted back-to-back angular contact type. The bearing lubrication system includes an oil bath, a constant level oiler and an oil sight glass. Operating Parameters Flowserve WXB Pumps – Barrel Pump for the Refinery and Petrochemical Industries Installation, Operation, and Maintenance Instructions for Horizontal, Multistage, Barrel Pumps Fully compliant with the latest ISO 13709/API 610 (BB1) standards, the Flowserve LPN axial split case, medium pressure pump features the side/side nozzle configuration preferred for hydrocarbon and water transfer applications. Double Volute, Axially Split Casing Design minimizes hydraulic radial forces in any condition down to the minimum flow, thus reducing shaft deflection and increasing the life of bearings, seals and wear rings. Suction and Discharge Nozzles are integrally cast in the lower half casing to permit pump disassembly without disturbing the piping. Nozzles are designed to handle external forces and moments equal to or in excess of ISO 13709/API 610 specifications. Near Centerline Mounting provides superior pump alignment and performance at elevated temperatures. Confined Gasket Design allows metal-to-metal contact for proper gasket compression and eliminates corrosion of bolts and nuts. Raised Face Flanges meet ASME B16.5 standards and are available in Class 150 (PN 20) and 300 (PN 40). Renewable Casing and Impeller Wear Rings are standard, permitting continued high-efficiency operation. Clearances are per ISO/API requirements Double Suction Impeller provides hydraulic axial balance and allows minimal NPSHR. The complete rotor assembly is dynamically balanced to ensure vibration-free operation as per ISO/API requirements. ISO 21049/API 682 Seal Chambers operate at suction pressure and allow for installation of cartridge-style single, dual unpressurized and dual pressurized mechanical seals to meet required safety and environmental requirements. Operating Parameters Installation, Operation, and Maintenance for Between bearings, axially split, single stage, double suction pumps Flowserve Pumps for Hydrocarbon Processing – Refining, Petrochemical Processing Precision Cast Closed Impeller with extended hub has machined shrouds and is dynamically balanced for high efficiency. Axial thrust is minimized by balancing chamber and holes on the rear side. Volute Casing Design has end suction with top discharge. Open Seal Chamber features integral vortex-breaking ribs to extend mechanical seal life. A reduced footprint permits the MENBLOC pump to be used in tight areas. Operating Parameters Installation, Operation and Maintenance instructions for Close-coupled single-stage, axial suction, vertical discharge type centrifugal motopump The vertical, single stage LRV is part of a family of axially split, heavy-duty between bearing pumps that includes the horizontal, single stage LR and the two stage LLR. With thousands of units installed over the years, these pumps provide reliable and efficient performance in applications ranging from water supply to circulation duties to petroleum distribution. Split Case Design with lifting lugs simplifies maintenance by allowing access to the rotating element without disturbing piping or driver. Low NPSH Enclosed Double Suction Impellers provide high efficiency and optimum performance over a wide flow range. Small Footprint reduces floor space requirment. Suction and Discharge Flanges are available in flat or raised face and to ASME (ANSI), DIN, and ISO standards. Maintenance-free, Product-lubricated Bottom Bearing eliminates the need for mechanical seal and ball bearing. Seal Chamber Design accommodates component or cartridge type mechanical seals as well as graphite impregnated non-asbestos packing with a lantern ring. Standard Case Wear Rings allow economical renewal of operating clearances. Special serrated groove designs are available. Features: Flowserve LR, LRV, LLR and LR-S Pumps Maintenance Checklist Flowserve LR (Single Stage Horizontal), LRV (Single Stage Vertical), LLR (Two Stage Horizontal), Axially Split, General Industry Pumps Installation, Operation, and Maintenance instructions for LR, LRV, LLR and LR-S Centrifugal Pumps – Horizontal, split case, volute type centrifugal pumps for water and general service (Based on C953KH013) The LR family of pumps provides a broad range of hydraulic coverage and low total cost of ownership. With thousands of units installed over the years, these pumps provide reliable and efficient performance in applications ranging from water supply to circulation duties to petroleum distribution. Split case design with lifting lugs simplifies maintenance by allowing access to the rotating element without disturbing piping or driver. Low NPSH enclosed impellers provide optimal high-efficiency performance over a wide flow range. Radial and thrust bearings are available with oil or grease lubrication. Designs include single row, deep groove ball bearings or duplex thrust ball bearings. Heat-treated steel shaft limits deflection to 0.05mm (0.002 in), prolonging seal life. Operating Parameters Flowserve LR, LRV, LLR and LR-S Pumps Maintenance Checklist Flowserve LR (Single Stage Horizontal), LRV (Single Stage Vertical), LLR (Two Stage Horizontal), Axially Split, General Industry Pumps Installation, Operation, and Maintenance instructions for LR, LRV, LLR and LR-S Centrifugal Pumps – Horizontal, split case, volute type centrifugal pumps for water and general service (Based on C953KH013) The two stage LLR is part of a family of axially split, heavy-duty between bearing pumps that includes the horizontal, single stage LR and the vertical LRV. With thousands of units installed over the years, these pumps provide reliable and efficient performance in applications ranging from water supply to circulation duties to petroleum distribution. Flowserve LR, LRV, LLR and LR-S Pumps Maintenance Checklist Flowserve LR (Single Stage Horizontal), LRV (Single Stage Vertical), LLR (Two Stage Horizontal), Axially Split, General Industry Pumps Installation, Operation, and Maintenance instructions for LR, LRV, LLR and LR-S Centrifugal Pumps – Horizontal, split case, volute type centrifugal pumps for water and general service (Based on C953KH013) Double Helical Herringbone Gears provide quiet, pulse-free flow with better load carrying ability, greater strength and minimum hydraulic shock. Between Bearing Design virtually eliminates shaft deflection, even while accommodating heavy, highly viscous loads. Heavy-Duty Caged Roller Bearings result in long life. Hydrex pumps use the heaviest duty commercially available bearings. Features: Multistage, Overhung Construction enables better suction performance while simplifying pipe work layout. Back Pullout Construction facilitates inspection and maintenance Sturdy Bearing Frame is generously sized to handle belt loads. Grease lubricated ball bearings are standard. Oversized Shaft is conservatively designed to minimize deflection and reduce wear. Shaft Sealing is accomplished via packed gland or mechanical seal. Available Configurations Operating Parameters 71576286-e Centerline Supported Pump Casing accommodates nozzle loads in accordance with ISO13709/API 610 design requirements. Precision Cast Impeller is dynamically balanced to limit vibration and assure smooth operation over a wide flow range. Flanges are in accordance with ASME B16.5 Class 300 RF standard or 600 RF optional. ISO 21049/API 682 seal chamber accommodates a wide variety of seal configurations including dual pressurized and unpressurized cartridge types for the most severe services. Semi-Open Impeller and High Pressure designs available. Operating Parameters ps-10-20-ea4 71569274-75-76-eIntroduction Features Literature
WXB Between Bearings, Diffuser Casing, Multistage, Process Barrel Pump
Brand:
Worthington
Description:
The WXB is a multistage, diffuser-casing barrel pump with tandem impellers and a balance drum to carry axial thrust forces.…
FPSO, Dewatering and Water Supply (mining), Heavy Oil, Oil Sands and Shale, Hydrocracking, Hydrotreating, LNG, Primary Processing (mining), Residuum and Heavy Oil Upgrading, Water and CO2 Injection, Auxiliary (chemical), Boiler Feed, Boiler Feed (pulp and paper), Descaling, Catalytic Cracking, Crude, Product and CO2 Pipeline, Gas to Liquids
Power Generation, Primary Metals, Oil and Gas, Pulp and Paper, Chemical Processing, Mining
WXB Multistage, Diffuser Barrel Pump Chart
WXB Multistage, Diffuser Barrel Pump App
WXB Pump Bulletin
WXB centrifugal pumps User Instructions
Introduction Features Literature
LPN ISO 13709/API 610 (BB1) Between Bearings, Single Case, Axially Split, Double Suction, Single Stage Pump
Brand:
Worthington
Description:
Fully compliant with the latest ISO 13709/API 610 (BB1) standards, the Flowserve LPN axial split case, medium pressure pump…
Dewatering and Water Supply (mining), Heavy Oil, Oil Sands and Shale, Drilling and Production, Fire Protection, Water Supply and Distribution (water), Auxiliary Services (power), Water Supply and Treatment (oil and gas), Boiler Feed Booster, Condensate Extraction, FPSO, Gas Treating and Sulfur Recovery, Gas to Liquids, LNG, Nuclear Service, Offsites, Cooling Water (power), Distillation (oil and gas)
Water Resources, General Industries, Power Generation, Oil and Gas, Mining
API682, API610
LPN Range Chart
LPN Between Bearings, Single Case, Axially Split App
LPN Centrifugal Pumps User Instructions
Hydrocarbon Processing Pumps
IntroductionTab title Literature
MENBLOC Close Coupled, Overhung Industrial Process Pump
Brand:
Worthington
Description:
MENBLOC is the closed coupled configuration of the MEN water pump. Not requiring a baseplate or coupling, it is an economical…
MENBLOC is the closed coupled configuration of the MEN water pump. Not requiring a baseplate or coupling, it is an economical alternative to the frame-mounted ME.
HVAC, Water Treatment, Water Supply and Distribution (water), Agriculture, Ground Water Development and Irrigation, Fire Protection
Water Resources, General Industries
MEN Close Coupled, Overhung Industrial Process Pump App
MENBLOC centrifugal pump User Instructions
Introduction Features Literature
LRV Vertical, Between Bearing, Axially Split, Single Stage, General Industry Pump
Brand:
Worthington
Description:
The vertical, single stage LRV is part of a family of axially split, heavy-duty between bearing pumps that includes the horizontal,…
Utility, Waste Water, Water, OEM, Building Trades and Services, Beverage Processing, Metal and Steel Industry, Mining, Food Processing, Pulp and Paper, Pharmaceuticals, Petroleum Distribution, Rubber, Agriculture
Water Treatment, Wastewater Collection and Treatment, Water Supply and Distribution, Ground Water Development and Irrigation
API610
LR, LRV, LLR and LR-S Pumps Maintenance Checklist
LR, LRV, LLR Pumps Bulletin
LR, LRV, LLR and LR-S User Instructions
Introduction Features Literature
LR Between Bearings, Single Case, Axially Split, Single Stage Pump
Brand:
Worthington
Description:
The LR family of pumps provides a broad range of hydraulic coverage and low total cost of ownership. With thousands of units…
Construction, Offsites and Waste Treatment, Cooling Water, Cooling Water (metals), Dewatering and Water Supply (mining), Flood Control, Ground Water Development and Irrigation, Food Processing, HVAC, Boiler Feed, Shower Pumps, Water Treatment, Boiler Feed Booster, Water Supply and Distribution (water), Condensate Extraction, Water Supply and Treatment (oil and gas), FPSO, OEM, Agriculture
Pulp and Paper, Water Resources, General Industries, Primary Metals, Oil and Gas, Power Generation, Mining
LR Between Bearings, Single Case, Axially Split, Single Stage Pump Chart
LR Between Bearing, Axially Split, Single Stage, General Industry Pump App
LR, LRV, LLR and LR-S Pumps Maintenance Checklist
LR, LRV, LLR Pumps Bulletin
LR, LRV, LLR and LR-S User Instructions
Introduction Features Literature
LLR Between Bearing, Axially Split, Two Stage, General Industry Pump
Brand:
Worthington
Description:
The two stage LLR is part of a family of axially split, heavy-duty between bearing pumps that includes the horizontal, single…
Agriculture, Utility, Water, Beverage Processing, Building Trades and Services, Boiler Feed, Desalination, Food Processing, Water Supply, Water Treatment, Mining, OEM, Pulp and Paper, Pharmaceuticals, Petroleum Distribution, Rubber, Metal and Steel Industry, Waste Water
Dewatering & Water Supply, Ground Water Development and Irrigation, General Industries, Water Handling and Treatment, Water Supply and Distribution, Water Treatment
LR, LRV, LLR and LR-S Pumps Maintenance Checklist
LR, LRV, LLR Pumps Bulletin
LR, LRV, LLR and LR-S User Instructions
Introduction Features Literature
Hydrex Double Helical, Rotary Gear Pump
Brand:
IDP, Worthington
Description:
The Flowserve Hydrex herringbone gear, rotary pump is a simplified but extremely reliable design for a wide variety of pumping…
The Flowserve Hydrex herringbone gear, rotary pump is a simplified but extremely reliable design for a wide variety of pumping applications. The high pressure angle and long involute profile of the precision made herringbone gear rotors eliminate root trapping, ensure smooth power transmission, and deliver quiet, efficient operation.
Chemical Processing, General Purpose, Greases and Fats, High Viscosity Polymers, Marine, Pulp and Paper, Petroleum Production and Refining, Syrups, Utility
There is no literature for this product.
Introduction Features Literature
F-Line End Suction Multistage Industrial Process Pumps
Brand:
Worthington
Description:
The F-Line is a family of multistage, overhung pumps with excellent hydraulic efficiency and high suction lift capability,…
The F-Line is a family of multistage, overhung pumps with excellent hydraulic efficiency and high suction lift capability, making them ideal for high pressure water applications. Available in several configurations, including the FP, the F-Line is built upon a modular platform that enables the pumps to be accurately sized for the required operating conditions.
Fire Protection, Water Supply and Distribution (water), Ground Water Development and Irrigation
Water Resources, General Industries
F Line Application
FP Centrifugal Pump User Instructions
Installation, Operation, and Maintenance instructions for Multi-stage, single suction and radial joint plan pump type centrifugal pumps.
Introduction Features Literature
ERPN-M Overhung, Magnetic Drive Process Pump
Brand:
Worthington, IDP
Description:
The ERPN-M sealless process pump is the solution for applications where leak-free pumping of hazardous, toxic, explosive…
The ERPN is the pump of choice for severe chemical, petrochemical, refining and heavy-duty industrial service where full compliance with API 610 is not required. This pump provides users with the important mechanical, hydraulic, emissions control and safety components required by the latest ISO 13709/API 610 standards.
Solvents, Waste Processing, Caustic and Chlor-alkali, Acid Transfer, Polymers, Volatile Organic Compounds, Distillation (oil and gas), Drilling and Production, Offsites and Waste Treatment, Paper Stock, Slurry Processing, Auxiliary Services (power)
Pulp and Paper, Power Generation, Oil and Gas, Chemical Processing
API682
ERPN Overhung, Single Stage, Process Pump Chart
ERPN Overhung, Single Stage, Process Pump App
ERPN Pump Bulletin
Flowserve ERPN Pumps – Overhung, End-Suction Process Pump – ISO 13709/API 610 (OH2)
ERPN centrifugal pumps User Instructions
Installation, Operation, & Maintenance Instructions for Horizontal, End Suction Pumps
The ERPN is the pump of choice for severe chemical, petrochemical, refining and heavy-duty industrial service where full compliance with API 610 is not required. This pump provides users with the important mechanical, hydraulic, emissions control and safety components required by the latest ISO 13709/API 610 standards. Centerline Supported Pump Casing accommodates nozzle loads in accordance with ISO13709/API 610 design requirements. Precision Cast Impeller is dynamically balanced to limit vibration and assure smooth operation over a wide flow range. Flanges are in accordance with ASME B16.5 Class 300 RF standard or 600 RF optional. ISO 21049/API 682 seal chamber accommodates a wide variety of seal configurations including dual pressurized and unpressurized cartridge types for the most severe services. Semi-Open Impeller and High Pressure designs available. Operating Parameters Flowserve ERPN Pumps – Overhung, End-Suction Process Pump – ISO 13709/API 610 (OH2) Installation, Operation, & Maintenance Instructions for Horizontal, End Suction PumpsIntroduction Features Literature
ERPN Overhung Centerline Mounted API Process Pump
Brand:
Worthington
Description:
The ERPN is the pump of choice for severe chemical, petrochemical, refining and heavy-duty industrial service where full…
Solvents, Waste Processing, Caustic and Chlor-alkali, Acid Transfer, Polymers, Volatile Organic Compounds, Distillation (oil and gas), Drilling and Production, Offsites and Waste Treatment, Paper Stock, Slurry Processing, Auxiliary Services (power)
Pulp and Paper, Power Generation, Oil and Gas, Chemical Processing
API682
ERPN Overhung, Single Stage, Process Pump Chart
ERPN Overhung, Single Stage, Process Pump App
ERPN Pump Bulletin
ERPN centrifugal pumps User Instructions
The Flowserve ECPJ is a rugged, single stage vertical lineshaft sump pump designed to perform tough jobs reliably, under a variety of difficult conditions. Based on a modular design system, it is fully compliant with the latest ISO 13709/API 610 (VS4) standards and may be custom engineered for the specific application in which it will be used. Pump Casing and Cover features metal to metal fit with fully confined, controlled compression gasket to endure proper sealing and alignment. Dynamically Balanced Precision Cast Impeller limits vibration and ensures smooth operation over a wide flow range. An anti-rotation impeller nut positively locks the impeller to the shaft without exposing its threads to the pumped fluid. API 682 Seal Chambers allow for installation of cartridge style single, dual unpressurized and dual pressurized mechanical seals to meet required safety and environmental requirements. Modular Design with a range of impeller and casing designs allows the hydraulics to be tailored to the service requirements. Thrust Pot with API 40° angular contact bearings in back-to-back arrangement enables standard (non thrust) electrical motors to be used and fulfills API 610 bearing life criteria.. Features: Operating parameters Installation, Operation, and Maintenance instructions for Vertical, single stage sump pumps ATEX Zone 0 (Category 1) Certificate for WUJ, ECPJ, JCP, CPXV, CPXV fitted with Mark 3 hydraulics (Brunn and Newark plant) The Flowserve WUJ vertical turbine is a radial flow or axial flow type, multistage, heavy-duty single casing pump. It is designed for wet pit or deep well applications. Choice of Radial or Mixed Flow Hydraulics to best meet service requirements. Choose radial flow hydraulics for low-flow, high head applications; mixed flow hydraulics for high-flow, low head applications. Axial Thrust Tilting Pad Bearing Configuration allows use of standard motors for high horsepower or ultra-high thrust operating conditions. Stiff Shaft Design ensures stable operation under all service conditions. ISO 21049/API 682 Compliant Mechanical Seal Chamber accommodates all cartridge mounted seal designs, including single, dual unpressurized or pressurized liquid or gas designs. Features: Operating Parameters Installation, Operation, & Maintenance Instructions for Vertical, Multistage Wet Pit Pumps Flowserve WUJ ISO 13709/API 610 (VS1) Vertical Line Shaft Pump Poster Compliant with ISO 13709/API 610 (VS6), the Flowserve WUC vertical turbine is a radial flow or axial flow type, multistage, heavy-duty double casing pump. It is designed for continuous unspared duty at a variety of high-pressure services, operating at temperature extremes and handling difficult liquids. Flanged Spacer Type Coupling permits easy maintenance of thrust bearings and mechanical seals without disturbing or removing driver. Separate Axial Thrust Bearing Assembly designed to withstand total hydraulic thrust and rotor weight. ISO 21049/API 682 Compliant Mechanical Seal Chamber accommodates all cartridge mounted seal designs, including: single and dual pressurized or unpressurized liquid; and gas designs. Screen-Type Non-Sparking Coupling Guard provides safety while allowing visual inspection of coupling and mechanical seal areas. Casing and Impeller Wear Rings feature a minimum 50 Brinell hardness difference between them. These rings prevent galling, allow economical retention of operating efficiency and maintain mechanical stability. Operating Parameters Flowserve WUC ISO 13709/API 610 Pump – (VS6) Double Casing Pump Flowserve WUC Pumps – API 610 (VS6) Vertical Multistage Double-Casing Pump Flowserve WUC Pumps – ISO 13709/API 610 (VS6) Vertical Multistage Double Case Process PumpIntroduction Features Literature
ECPJ ISO 13709/API 610 (VS4) Vertical Sump Pump
Brand:
Worthington
Description:
The Flowserve ECPJ is a rugged, single stage vertical lineshaft sump pump designed to perform tough jobs reliably, under…
Auxiliary (chemical), Drilling and Production, Flood Control, Ground Water Development and Irrigation, Water Supply and Treatment (oil and gas), Molten Salt Transfer, Offsites and Waste Treatment, Renewable Fuel Production, Shipping, Heavy Oil, Oil Sands and Shale
Oil and Gas, Power Generation, General Industries, Chemical Processing, Water Resources
API610, API682
ECPJ API 610 (VS4) Vertical Sump Pump Chart
ECPJ API 610 (VS4) Vertical Sump Pump Application
ECPJ centrifugal pumps User Instructions
ATEX Zone 0 EC Type Examination Certificate
Introduction Features Literature
WUJ ISO 13709/API 610 (VS1), latest ed. (VS1) Vertical Lineshaft, Multistage Wet Pit Pump
Brand:
Worthington
Description:
The Flowserve WUJ vertical turbine is a radial flow or axial flow type, multistage, heavy-duty single casing pump. It is…
LNG, Sewage Collection and Treatment, Water Supply and Distribution (water), Catalytic Cracking, Condensate Extraction, Crude, Product and CO2 Pipeline, Hydrotreating, Distillation (oil and gas), FPSO, Ground Water Development and Irrigation, Flood Control, Hydrocracking, Water Treatment, Dewatering and Water Supply (mining)
General Industries, Mining, Water Resources, Power Generation, Oil and Gas
API610, API682
WUJ API 610 (VS1), Vertical Wet Pit Pump Chart
WUJ ISO 13709/API 610 (VS1), (VS1) Vertical Lineshaft App
WUJ centrifugal pumps User Instructions
WUJ ISO 13709/API 610 (VS1) Vertical Line Shaft Pump Poster
Introduction Features Literature
WUC ISO 13709/API 610 (VS6) Vertical, Double Case, Multistage Pump
Brand:
Worthington
Description:
Compliant with ISO 13709/API 610 (VS6), the Flowserve WUC vertical turbine is a radial flow or axial flow type, multistage,…
Acid Transfer, Catalytic Cracking, Condensate Extraction, Crude, Product and CO2 Pipeline, Dewatering and Water Supply (mining), Water Treatment, Hydrocracking, Hydrotreating, Industrial Gases, LNG, Snowmaking, Distillation (oil and gas)
Power Generation, Water Resources, Oil and Gas, General Industries, Mining, Chemical Processing
API682, API610
WUC ISO 13709/API 610 (VS6) Vertical, Double Case, Multistage Pump Chart
WUC ISO 13709/API 610 (VS6) Vertical, Double Case, Multistage Pump App
WUC ISO 13709/API 610 Pump Poster
WUC Pump Poster
WUC Pump Bulletin
The WNC is a diffuser casing, high-energy barrel pump found in power plants around the globe. Highly efficient and durable, the WNC features a massive forged barrel, tandem impellers and a cartridge-style inner casing sub-assembly. Radially Split Inner Case Sub-Assembly facilitates inspection and maintenance in the field. Tandem Impeller Design facilitates maintenance by permitting replacement of a single casing stage. High-Strength Rigid Bearing Housings are incorporated into the WNC design. High Shaft Diameter to Bearing Span Ratio results in low shaft deflection, thereby increasing bearing, mechanical seal and wear ring life. Operating Parameters Flowserve Utility Barrel Pumps Bulletin – Between Bearing, Multistage, Double Casing (WXB, WNC, CSB, CHTA, HDB)Introduction Features Literature
WNC Between Bearings, Diffuser Casing, Multistage, Utility Barrel Pump
Brand:
Worthington
Description:
The WNC is a diffuser casing, high-energy barrel pump found in power plants around the globe. Highly efficient and durable,…
Boiler Feed
Power Generation
WNC Multistage Diffuser Barrel Pump Chart
WNC Multistage Diffuser Barrel Pump App
Utility Barrel Pumps Bulletin (WXB, WNC, CSB, CHTA, HDB)
The WCC is a multistage, diffuser type barrel pump with a tandem impeller rotor and a single-diameter balance drum to compensate for residual axial thrust. The radially split inner element facilitates inspection and rapid changeout with a spare. Wrought Shafts are incrementally stepped at each impeller fit for ease of assembly. Precision-Cast Impellers ensure optimum hydraulic efficiency and repeatability of performance. Optional Grooved Impeller Running Fits increase the pump’s tolerance to foreign materials and desensitizes it during start-up, stopping and system transients. Multivane Diffusers balance radial loads over the operating range, while maximizing efficiencies at the duty condition. A continuous metal-to-metal seal between stage pieces minimizes risk of internal leakage. Operating Parameters WCC General Purpose Barrel Pump for the Oil and Gas Industry ISO 13709/API 610 (BB5)Introduction Features Literature
WCC 13709/API 610 (BB5) Between Bearings, Diffuser Casing, Multistage Process Barrel Pump
Brand:
Worthington
Description:
The WCC is a multistage, diffuser type barrel pump with a tandem impeller rotor and a single-diameter balance drum to compensate…
Auxiliary (chemical), Water and CO2 Injection, Crude, Product and CO2 Pipeline
Oil and Gas, Chemical Processing
API610, ISO
WCC 13709/API 610 (BB5) Between Bearings, Diffuser Casing, Multistage Process Barrel Pump App
WCC General Purpose Barrel Pump Bulletin
The Type W is a radially split, single stage, single suction, vertical in-line pump and is compliant with API 610 (OH4), latest edition. It is designed for continuous duty service on all process and industrial applications. Heavy-Duty Casing supports pump and motor when mounted in line. Dual volute design on larger discharge pumps minimizes radial thrust, reduces shaft deflection, and increases seal life. Dynamically Balanced Impeller is precision cast and positively locked against rotation. Generous Seal Cavity accommodates single, double and tandem seals. Shaft run-out can be set on installed unit with adjustable, rigid spacer coupling, maximizing seal life. Motor Support designed to allow back pull-out for ease of maintenance or inspection. Precision machined rabbet fit provides positive alignment between pump and motor. Features: ®Nitronic is a registered trademark of AK Steel Flowserve HWX API 610 Vertical In-Line Process Pumps – API OH3 Pump Bearing Frame, API OH4 Rigidly Coupled, API OH5 Close CoupledIntroduction Features Literature
W API 610 (OH4), Radially Split, Vertical In-Line, Rigid Coupled, Process Pump
Brand:
Wilson-Snyder, Worthington, Pacific, Byron Jackson, IDP, United Centrifugal
Description:
The Type W is a radially split, single stage, single suction, vertical in-line pump and is compliant with API 610 (OH4),…
Booster, Desalination, Offsites, Process
NGL, SAGD, Utilities, Water Handling and Treatment, Catalytic Cracking, Crude Handling and Treatment, Logistics and Tank Farm, Distillation, Gas-to-Liquids, Gas Treatment, Hydrocraking, Hydrotreating, LNG, Delayed Coking
W API 610 (OH4), Radially Split, Vertical In-Line, Rigid Coupled, Process Pump Chart
HWX API 610 Vertical In-Line Process Pumps Bulletin
The VPC vertical turbine, double casing pump is a diffuser type, single or multistage design for services with limited NPSH available. Solid Shaft Motor includes thrust bearing to withstand the total hydraulic thrust as well as the rotor wirght. Rigid, Adjustable Flanged Coupling provides the proper impeller clearance adjustment. Bowls are designed with multiple diffuser vanes and flanged construction. Bowl bearings on either side of the impeller provide rigid shaft support. Enclosed or Semi-Open Impellers are cast to provide smooth passageways for more efficient fluid flow. Suction Bell is designed to provide efficient fluid flow into the eye of the first stage impeller. Operating Parameters Flowserve VPC Vertical Turbine, Double Casing Pumps – ISO 13709 and API 610 (VS6), 10th Edition Flowserve VTP & VPC Pumps – Vertical Turbine Wet Pit and Double Casing Pumps Flowserve Vertical Turbine Snowmaking Pumps – Models VTP and VPCIntroduction Features Literature
VPC Vertical Turbine, Double Case Pump
Brand:
Worthington
Description:
The VPC vertical turbine, double casing pump is a diffuser type, single or multistage design for services with limited NPSH…
Agriculture, Condensate Extraction, Crude, Product and CO2 Pipeline, Dewatering and Water Supply (mining), Gas Treating and Sulfur Recovery, Ground Water Development and Irrigation, Water and CO2 Injection, Nuclear Service, Offsites and Waste Treatment, Snowmaking, Water Supply and Distribution (water), Water Treatment, LNG
General Industries, Mining, Water Resources, Power Generation, Oil and Gas
VPC (VTP-Can) Vertical Turbine, Double Casing Pump Chart
VPC (VTP-Can) Vertical Turbine, Double Casing Pump App
VPC Vertical Turbine, Double Casing Pumps Poster
VTP & VPC Pumps Maintenance Checklist
Vertical Turbine Snowmaking Pumps Bulletin
The UZDL is an axially split, two stage pump designed to the latest ISO 13709/API 610 (BB1) standards. With a double suction first-stage impeller, the UZDL pump is a natural solution for many low NPSH, high working pressure applications such as pipeline and transfer services. The pump fills the performance gap between the single stage DVS and multistage DMX pumps. Double Suction First-stage Impeller reduces NPSHR and often eliminates the need for booster units. Double Volute Construction for both stages minimizes hydraulic loads in any service condition down to minimum flow. API 682 Seal Chambers operate at suction pressure and allow for installation of cartridge design single, dual unpressurized and dual pressurized mechanical seals to meet safety and environmental requirements. Shaft Options include double extension for connection to auxiliary pumps or hydraulic turbines, and special shaft end machining for hydraulic fitted couplings. Baseplate Designs and Pump Packages engineered to contract requirements. Dynamic Balancing and TIR Verifications on assembled rotors ensure optimum mechanical performance throughout the operating range. Features: Flowserve UZDL Pumps – API 610 (BB1) Between Bearings, Two-Stage, Axially Split Pump Installation, Operation, and Maintenance for Between bearings, two stage, axially split pumpsIntroduction Features Literature
UZDL 13709/API 610 (BB1) Between Bearings, Axially Split, Two Stage Pump
Brand:
Worthington
Description:
The UZDL is an axially split, two stage pump designed to the latest ISO 13709/API 610 (BB1) standards. With a double suction…
LNG, Offsites and Waste Treatment, Cooling Water (power), Crude, Product and CO2 Pipeline, Dewatering and Water Supply (mining), Heavy Oil, Oil Sands and Shale, Gas Treating and Sulfur Recovery, Water Supply and Distribution (water), FPSO, Gas to Liquids, Fire Protection
General Industries, Mining, Water Resources, Power Generation, Oil and Gas
API610, API682
UZDL API 610 (BB1), Between Bearing, Axially Split, Two Stage Pump Chart
UZDL API 610 (BB1), Between Bearing, Axially Split, Two Stage Pump App
UZDL Pump Poster
UZDL Centrifugal Pumps User Instructions
The type RJC rubber lined slurry pump is a true stiff-shaft cantilever design, without bottom bearings and requiring no flushing water. The RJC is particularly well suited for applications for which flushing liquids are not available or cannot be tolerated. Casing halves are cast iron fitted with replaceable, abrasion resistant rubber liners, which are pressure molded to steel backing plates and secured to casing externally by heavy-duty studs and nuts. Rubber Closed Impeller is pressure molded to ductile iron skeleton and includes pump-out vanes on front and rear shroud to reduce stuffing box pressure and suction recirculation. Standard Packing Type Stuffing Box is protected by replaceable wear plate and is drilled and tapped for L5 and 2L3 lantern ring positions. Provided with full and low flow flush connections. Features: Flowserve Type R Rubber-Lined Slurry PumpIntroduction Features Literature
RJC Overhung, Vertical Cantilever, Rubber Lined Slurry Pump
Brand:
Worthington
Description:
The type RJC rubber lined slurry pump is a true stiff-shaft cantilever design, without bottom bearings and requiring no flushing…
Dry Pit, Mining, Mineral Processing, Sump Service, Pulp and Paper, Wet Pit
Leaching Acid, Primary Processing, Slurry Processing, Slurry Transfer, Heavy Oil and Upgrading
Type R Rubber-Lined Slurry Pump Product Bulletin
The type RJ rubber lined, vertical lineshaft pump is designed to handle services containing fine solids in suspension and is suitable for a broad range of wet and dry pit applications. Casing halves are cast iron fitted with replaceable, abrasion resistant rubber liners, which are pressure molded to steel backing plates and secured to casing externally by heavy-duty studs and nuts. Rubber Closed Impeller is pressure molded to ductile iron skeleton and includes pump-out vanes on front and rear shroud to reduce stuffing box pressure and suction recirculation. Standard Packing Type Stuffing Box is protected by replaceable wear plate and is drilled and tapped for L5 and 2L3 lantern ring positions. Provided with full and low flow flush connections. Cast Iron Lower Bearing Housing is fitted with a rubber or urethane fluted bearing, which is contained in a rigid stainless steel shell and lubricated from an external clear liquid source. Features: Flowserve Type R Rubber-Lined Slurry Pump The QLC and QLQC are double casing, double suction, vertical turbine pumps. Available in single or multistage units and featuring true twin volutes, these pumps incorporate the proven hydraulics of the QL and QLQ into a double casing configuration. Versatile Seal Chamber accommodates installation of cartridge-style single, dual pressurized and dual unpressurized mechanical seals to meet safety and environmental requirements. Keyed Impeller design provides ease of maintenance. Renewable Impeller Wear Rings enable the restoration of original clearances and promote high operating efficiency. Casing wear rings are standard. Line Shaft Bearings are spaced to ensure the first critical speed of the rotor is well above running speed. Sleeves are provided under bearings for additional shaft protection. Operating Parameters Flowserve QLC and QLQC Series Double-Casing, Double-Suction, Twin-Volute Turbine Pumps Poster Flowserve QL Series Pumps – Vertical, Double-Suction Twin-Volute Turbine Pumps – QL – QLQ – QLC – QLQC Installation, Operation, and Maintenance for Single stage, double suction, vertical wet pit and canned centrifugal pumpsIntroduction Features Literature
RJ Overhung, Vertical Lineshaft, Rubber Lined Slurry Pump
Brand:
Worthington
Description:
The type RJ rubber lined, vertical lineshaft pump is designed to handle services containing fine solids in suspension and…
Water Treatment, Wet Pit, Sump Service, Dry Pit, Pulp and Paper, Mineral Processing, Mining, Slurries
Scale Recycle, Water Treatment, Water Supply and Distribution, Slurry Transfer, Wastewater Collection and Treatment
Type R Rubber-Lined Slurry Pump Product Bulletin
Introduction Features Literature
QLC and QLQC Vertical Double Case, Double Suction Twin Volute
Brand:
Worthington
Description:
The QLC and QLQC are double casing, double suction, vertical turbine pumps. Available in single or multistage units and…
Desalination, Dewatering and Water Supply (mining), Fire Protection, Water Supply and Distribution (water), Condensate Extraction, Leaching Acid, Auxiliary Services (power), Descaling, Geothermal Well Services, Molten Salt Transfer, Ground Water Development and Irrigation
General Industries, Mining, Water Resources, Power Generation, Primary Metals, Oil and Gas
QLC and QLQC Vertical Double Case, Double Suction Twin Volute Chart
QLC and QLQC Series Pumps Poster
QL Series Pumps Bulletin
QL and QLC Centrifugal Pumps User Instructions
