0

MCIP-SERIES-13-of-18

Conceptualized, Designed, Engineered and Manufactured CIP Systems by Gamajet, The Tank Cleaning Experts.

When cleaning tanks, the solution starts with the tank, not your plant infrastructure. With a Gamajet cleaning machine, your tanks will be cleaned in the most efficient, effective and verifiable manner. To support this revolutionary technology, you do not need to install an expensive CIP cleaning system and incur all of the infrastructure costs associated with installation and plumbing.

Gamajet’s MCIP series provides optimal cleaning performance by delivering the required pressure and flow for efficient tank cleaning at a fraction of the cost. Each system is tailored for your specific needs, based on your tank cleaning application. Cleaning tanks begins with choosing the proper tank cleaning machine(s). Therefore designing a CIP system needs follow the selection of the appropriate tank cleaning method, not the other way around. Providing the proper CIP system to power the Gamajet will guarantee an efficient and thorough cleaning process for your tank cleaning requirements. As tank cleaning specialists with decades of experience in tank cleaning, Gamajet can provide you with the best tank cleaning solution from start to finish.

BenefitsTechnicalProductSheet
  • Affordable
  • Portable
  • Non-Intrusive to your Plant Infrastructure
  • Designed around your Tank Cleaning Needs
  • Efficient and Effective
  • Validatable

Designing the Appropriate MCIP System begins with ”sizing” the right Gamajet Tank Cleaning Machine for your Application

1. Understand Process and Cleaning Requirements
2. Conceptualize the Most Efficient and Effective Solution
3. Size a Gamajet Machine for the Application
4. Select Gamajet MCIP Model Type for Application
5. Select/Add additional Features
6. Engineer/Design the System
7. Build the CIP System
8. Clean Better, and Faster

Designing the appropriate MCIP (Mobile Clean-in-Place) system begins with the sizing of the appropriate tank cleaning machine. Our tank cleaning experts work with you to select the most efficient and effective cleaning machine based on your unique application. Once the cleaning
device is selected, and a tank cleaning procedure is defined, designing and sizing a proper MCIP system to support the Gamajet is the next phase. Each Gamajet MCIP system begins with a standard model, based on the complexity of the application. Once the model type is selected,
additional features are added to customize the system to your specific needs. Designed together, the end result is a unique mobile cleaning system for your application. The comprehensive matrix shown below defines the standard features for each MCIP system model. Additional features such as multiple storage tanks, unique filtration, dosing of chemicals, rapid heating of wash fluid or multiple saved cleaning programs for each vessel can then be added to the model. Regardless of the tank cleaning application, Gamajet can provide an engineered solution.

MCIP Model Types
Sani: Sanitary Pump, Filter and Control Panel on Stainless Steel Cart
Sani-H: Sanitary Pump, Holding Tank, Filter and Control Panel Mounted on Stainless Steel Cart
Sani-D: Sanitary Pump, Dosing Pump with Reservoir(s) (or Venturi), Filter and Control Panel Mounted on Stainless Steel Cart
Sani-DH: Sanitary Pump, Dosing Pump with Reservoir(s) (or Venturi), Holding Tank, Filter and Control Panel Mounted on Stainless Steel Cart
VM: Vertical Multi-Stage Pump, Filter and Control Panel on
Stainless Steel Cart
VM-H: Vertical Multi-Stage Pump, Holding Tanks, Filter and Control Panel on Stainless Steel Cart
VM-D: Vertical Multi-Stage Pump, Dosing Pump with Reservoir(s) (or Venturi), Filter and Control Panel on Stainless Steel Cart
VM-DH: Vertical Multi-Stage Pump, Dosing Pump with Reservoir(s) (or Venturi), Holding Tank, Filter and Control Panel on Stainless Steel Cart
Opti: Full System. Individually Quoted

 

Primary Design Components

Pump: Sanitary or Vertical Multistage

Mount: Stainless Steel Cart  or Wall Mount

Control Panel:

Simple Start/Stop
Touch Screen System Controls with Appropriate NEMA Enclosures open or closedloop
Customized PLC Logic Digital Pressure, Flow Rate and Temperature Readout
Mechanical and Electronic Timers for Cycle and Total System Run Time
Administrative Password Protected Access to System Changes
VFD (Variable Frequency Drive) Control Pump Output
Saved Cleaning Programs for Multiple Vessels

Holding Tank:    Sizes and Materials Vary

Chemical Supply:

  • Venturi
  • Dosing Pump with Reservoir

Heating Element: Vary

Additional Supply Pumps for Open or Closed Looped Configuration or Separate Procedures
Vary Based on Need

Multiple Inlet and Discharge Ports:

Inlet Connections: Vary

Click Here for Download