M pumps Peripheral Metallic Pumps
Technical Characteristics I Technical Characteristics II Operation ManualBrochurePerformance Curves
T MAG-MPump construction
Close-coupled drivers are conventional drivers mounted directly to pumps frame. No base, coupling or guards are required for this mounting style.
Connections:
Universal fl anges rating according to DIN Norms Class PN16 – 40 & ANSI B16.5 Class 150 (standard)
Threaded BSP (GAS) & NPT (available on request)
Operating Limits
– Max viscosity 200cSt
– Max system pressure:
50 bar (standard)
150 bar(HP Version)
Higher pressure version available on request.
– Flow up to 9 mc/h
– Head up to 90 m
– Temperature range:
from -185°F(-120°C) to +662 °F (+350 °C)
– Electric motors from 0,55 up to 30 kW
Available ATEX II – / 2G cbk II C T2 – T5
Horizontal, sealless Peripheral pump with permanent magnet drive system, no mechanical seal.
The separation of liquid chamber/atmosphere by means of an isolation shell is the best solution to pump aggressive, explosive and toxic liquids, hydrocarbons, heat transfer liquids and liquids difficult to seal.
The hermetic sealless is the best solution for the chemical, pharmaceutical and petrochemical industry.
A wide range of pumps covers the different performances. Low flow and high heads are the main characteristics of this pump design.
Epoxy primer and poly-acrylic enamel water-based painting for the best quality resistance linked to the environmental respect.
Particular design of the hydraulic, with self balancing impeller to improve the the wear ring life.
CF8M or WCB Pump Casing & Impeller High quality casting components.
Other materials:
– Hastelloy® C276,
– Incoloy ®825,
– Duplex, or others available on request.
RWP QUICK CHANGE CARTRIDGE KIT
to guarantee an easy and fast maintenance.
The sealing system with flat gaskets prevents product from leaking in the atmosphere.
Different materials available:
– Asbestos free
– PTFE
– Graphoil
– Gylon®
The rear shell is made of one single piece, no welding, ellipsoidal profile that has been studied to withstand higher pressures than the traditional one.
Available two versions, AISI 316 the standard construction, and Hastelloy®C276 for high pressure version providing a safe and efficient solution system pressure max 150 bar.
Titanium Alloy is an upgrade when higher pressure ratings and increased efficiency are required.
Titanium Alloy is an upgrade when higher pressure ratings and increased efficiency are required.
High power synchronous magnetic coupling designed by our technical office and with rare earth magnetic elements mechanically locked.
The high performance magnets can operate at liquid temperature of up to 662 °F (350 °C) without external cooling.
Field assembling of the product lubricated bearing arrangement does not require special tools.
Bearing materials are available in four different types to provide the best solution for each application: Silicon Carbide (SSIC), Tungsten Carbide (TC), Carbon to allow a dry running situation and PTFEC/G for any applications where the Carbon cannot be used. The adoption of elastic rings reduces the sleeve bearing loads and the thrust bearing loads to the minimum, to guarantee many years of maintenance-free operation.
Technical Characteristics I Technical Characteristics II Operation ManualBrochurePerformance Curves
CT MAG-MSPump construction
Close-coupled drivers are conventional drivers mounted directly to pumps frame. No base, coupling or guards are required for this mounting style.
Connections:
Universal fl anges according to DIN PN16 – 40; ANSI B16.5 150# – 300# (2 stages vers.)Flanges PN 64 – 100; ANSI B 16.5 600# (4 stages vers.)
Other on request.
Operating limits
– Max viscosity 200 cSt
– Max system pressure:
50 bar (standard)
150 bar (HP Version)
150 bar (HP Version)
Higher pressure version available on request.
– Flow up to 12 mc/h
– Head up to 500 m
– Temperature range:
– Flow up to 12 mc/h
– Head up to 500 m
– Temperature range:
from -185 °F(-120°C)
to +662 °F (+350°C)
– Electric motors:
– Electric motors:
from 0,55 up to 75 kW
– Available ATEX II – / 2G cbk II C T2-T5
– Available ATEX II – / 2G cbk II C T2-T5
The separation of liquid chamber/atmosphere by means of an isolation shell is the best solution to pump aggressive, explosive and toxic liquids, hydrocarbons, heat transfer liquids and liquids difficult to seal.
The hermetic sealless is the best solution for the chemical, pharmaceutical and petrochemical industry. A wide range of pumps covers the different performances.
The hermetic sealless is the best solution for the chemical, pharmaceutical and petrochemical industry. A wide range of pumps covers the different performances.
Epoxy primer and poly-acrylic enamel water-based painting for the best quality resistance linked to the environmental respect.The hydraulic barrier between two stages is made of a special intermediate bushimg.
“Barrel” construction,with back inserted volute rings, to have the best hydraulic alignment and the longest wear rings life. Available in 2 or 4 stages.
Particular design of the hydraulic, with self balancing impeller to improve the wear ring life.
The range includes the construction with two and four stages, with or without centrifugal inducer to minimize the required NPSH up to 0,6 m, to allows the pumping of condensed and generally all low available NPSH installations.CF8M or WCB pump casing, cover & impellers High quality casting components.
Other materials:
Other materials:
– Hastelloy ® C276,
– Incoloy® 825,
– Duplex, or others available on request.
RWP QUICK CHANGE CARTRIDGE KIT
to guarantee an easy and fast maintenance.The rear shell is made of one single piece, no welding, ellipsoidal profile that has been studied to withstand higher pressures than the traditional one.
Available two versions, AISI 316 the standard construction, and Hastelloy®C276 for high pressure version – providing a safe and efficient solution – system pressure max 150 bar.
Titanium Alloy is an upgrade when higher pressure ratings and increased efficiency are required.
Available two versions, AISI 316 the standard construction, and Hastelloy®C276 for high pressure version – providing a safe and efficient solution – system pressure max 150 bar.
Titanium Alloy is an upgrade when higher pressure ratings and increased efficiency are required.
Low NPSH pumps (0,6 m) are the perfect design for the refrigeration market. Barrel construction, with back inserted volute rings, to have the best hydraulic alignment and the longest wear rings life.
Available in 2 or 4 stages.High power synchronous magnetic coupling designed by our Technical Office and with rare earth magnetic elements mechanically locked.
Available in 2 or 4 stages.High power synchronous magnetic coupling designed by our Technical Office and with rare earth magnetic elements mechanically locked.
The high performance magnets can be operated at liquid temperatures of up to 662°F (350 °C) without external cooling.Field assembling of the product lubricated bearing arrangement does not require special tools.
The bearing materials are available in four different types to provide the best solution for each application: Silicon Carbide (SSIC), Tungsten Carbide (TC), Carbon to allow a dry running situation and PTFEC/G for any applications where the Carbon cannot be used.
The adoption of elastic rings reduces the sleeve bearing loads and the thrust bearing loads to the minimum, to guarantee many years of maintenance-free operation.Sealing system with flat gaskets prevents product from leaking to the atmosphere.
The bearing materials are available in four different types to provide the best solution for each application: Silicon Carbide (SSIC), Tungsten Carbide (TC), Carbon to allow a dry running situation and PTFEC/G for any applications where the Carbon cannot be used.
The adoption of elastic rings reduces the sleeve bearing loads and the thrust bearing loads to the minimum, to guarantee many years of maintenance-free operation.Sealing system with flat gaskets prevents product from leaking to the atmosphere.
Different materials available:
– Asbestos free
– PTFE
– Graphoil
– Gylon®
– Asbestos free
– PTFE
– Graphoil
– Gylon®
Technical Characteristics I Technical Characteristics II Operation ManualBrochurePerformance Curves
CT MAG-MPump construction
Close-coupled drivers are conventional drivers mounted directly to pumps frame. No base, coupling or guards
are required for this mounting style.
Connections: Universal fl anges rating according to DIN Norms Class PN16 – 40 & ANSI B16.5 Class 150 (standard)Other on request
Operating limits
– Max viscosity 200cSt
– Max system pressure
50 bar (standard)
150 bar (HP Version)
Higher pressure version available on request.
– Flow up to 12 mc/h
– Flow up to 12 mc/h
– Head up to 164 m
– Temperature range:
– Temperature range:
from 185 °F (-120°C)
to +662 °F (+350°C)
– Electric motors:
– Electric motors:
from 0,55 up to 30 kW
– Available ATEX II – / 2G cbk II C T2 -T5
– Available ATEX II – / 2G cbk II C T2 -T5
Horizontal, sealless low NPSHr peripheral pump with permanent magnent drive system, no mechanical seal.
The separation of liquid chamber/atmosphere by means of an isolation shell is the best solution to pump aggressive, explosive and toxic liquids, hydrocarbons, heat transfer liquids and liquids difficult to seal. The hermetic sealless is the best solution for the chemical, pharmaceutical and petrochemical industry. A wide range of pumps covers the different performances. Low NPSH pumps (0,5 m) are the perfect design for the refrigeration market.
Epoxy primer and poly-acrylic enamel water-based painting for the best quality resistance linked to the environmental respect.
Particular design of the hydraulic, with self balancing impeller to improve the wear ring life.
CF8M or WCB Pump Casing & Impeller High quality casting components.
Other materials:
Other materials:
– Hastelloy® C276,
– Incoloy® 825,
– Duplex, or others available on request.
RWP QUICK CHANGE CARTRIDGE KIT
to guarantee an easy and fast maintenance.
Close-coupled drivers are conventional drivers mounted directly to pumps frame. No base, coupling or guards are required for this mounting style.Connections:
– Flange rating per DIN Norms Class PN16-25-40.
– Flange rating per ANSI B16.5 Class 300.
– Flange rating per DIN Norms Class PN16-25-40.
– Flange rating per ANSI B16.5 Class 300.
The sealing system with flat gaskets prevents product from leaking in the atmosphere.
Different materials available:
– Asbestos free
– PTFE
– Graphoil
– Gylon®
– Asbestos free
– PTFE
– Graphoil
– Gylon®
The rear shell is made of one single piece,no welding, ellipsoidal profile that has been studied to withstand higher pressures than the traditional one. Available two versions, AISI 316 the standard construction, and Hastelloy®C276 for high pressure version – providing a safe and efficient solution – system pressure max 150 bar. Titanium Alloy is an upgrade when higher pressure ratings and increased efficiency are required.
High power synchronous magnetic coupling designed by our Technical Office and with rare earth magnetic elements mechanically locked. The high performance magnets can operate at liquid temperature of up to 662°F (350°C) without external cooling.Field assembling of the product lubricated bearing arrangement does not require special tools. Bearing materials are available in four different types to provide the best solution for each application: Silicon Carbide (SSIC), Tungsten Carbide (TC), Carbon to allow a dry running situation and PTFEC/G for any applications where the Carbon cannot be used. The adoption of elastic rings reduces the sleeve bearing loads and the thrust bearing loads to the minimum, to guarantee many years of maintenance-free operation.
Technical Characteristics I Technical Characteristics II Operation ManualBrochurePerformance Curves
T ECO MAG-MPump construction
Close-coupled drivers are conventional drivers mounted directly to pumps frame. No base, coupling or guards are required for this mounting style.
Connections:
Threaded ½” BSP (GAS) & NP
Operating limits
– Max viscosity 200cSt
– Max system pressure 16 bar
– Flow up to 1,5 mc/h
– Head up to 85 m
– Temperature range:
– Head up to 85 m
– Temperature range:
from -185 °F (-120°C)
to +662 °F (+350 °C)
– Electric motors:
– Electric motors:
from 0,55 up to 2,2 kW
– Available ATEX II – / 2G cbk II C T2- T5
– Available ATEX II – / 2G cbk II C T2- T5
Horizontal, sealless Peripheral pump with permanent magnet drive system, no mechanical seal.
Low flow and high heads. Smart construction for quick maintenance and the best value for money are the main characteristics of this pump design.
Low flow and high heads. Smart construction for quick maintenance and the best value for money are the main characteristics of this pump design.
The rear shell is made of one single piece, no welding, special profile that has been studied to withstand higher pressures than the traditional one.The material is AISI 316; system pressure max 16 bar.
Particular design of the hydraulic, with self balancing impeller to improve the wear ring life. Field assembling of the product lubricated bearing arrangement does not require special tools.
The Volute/Bearing materials are available in two different types to provide the best solution for each application: Carbon graphite volutes with stainless steel shaft and Antimony carbon volutes with Silicon Carbide shaft.
CF8M Pump Casing & Impeller High quality casting components, CNC machined with high accuracy, for the best performance.
RWP QUICK CHANGE CARTRIDGE KIT
to guarantee an easy and fast maintenance.
The sealing system with O-ring gaskets prevents product from leaking in the atmosphere – different materials available:
– VITON® (standard)
– GRAPHOIL
– ARAMIDIC
– FEP
Epoxy primer and polyacrylic enamel water-based painting for the best quality resistance linked to the environmental respect.
High power synchronous magnetic coupling designed by our Technical Office and with rare earth magnetic elements mechanically locked.
High temperature version available up to +662°F (+350°C).
Quick maintenance:
repair the pump is very easy and fast, in three simple steps:
1/ Unscrew pump cover;
2/ Extract the cartridge, using one of the cover screw;
3/ Introduce the new cartridge and reassembly the pump.