Sandpiper SB1 & SB25 Metallic AODD Pump (Heavy Duty)
DescriptionFeaturesSpecification

Sandpiper’s SB1 &SB25 Metallic AODD Pump, Heavy Duty Pump

Sandpiper SB1 & SB25 Metallic AODD Pump (Heavy Duty)

Sandpiper’s AODD Pump, the SB1 & SB25 Metallic AODD Pump, is an exclusive design and best in class for moving thin-highly viscous and small, solids-laden fluids. The pump provides an excellent suction lift capabilities and is designed to withstand the most rugged and harsh ball valve pumping applications. It was designed with thick wall constructed of Sand-Casted Aluminum, Cast Iron, Stainless Steel or Alloy C with elastomer, TPE (thermal plastic elastomers) and PTFE options in diaphragms and check valves. The pump comes in a variety of porting options to optimize and fit the required applications.

These pumps are enhanced with extended-wear packages and are the optimal solution for abrasive slurry applications. Features include;

  • Top-ported: For fluids containing floating solids, suspended solids or entrained gasses. The discharge port is positioned above the center of the pump for easier evacuation.
  • Down-ported: For fluids containing settling solids. The discharge port is positioned below the center of the pump so solids settle in the elbow and are discharged. This helps reduce wear on the diaphragms and associated components.
  • Side-ported: For use in confined spaces. The ports are positioned with the center of the pump, allowing for installation in smaller, cramped spaces [available in 1″ (25 mm) and 1½” (40 mm) sizes only]
  • Compact Design
  • Weighted check balls: Are 30%-60% heavier than solid rubber check balls, allowing for more consistent chamber filling.
  • ESADS+ : Sandpiper is one of the only AODD Pump manufacturer to offer an externally serviceable air distribution system which allows complete access to the main air and pilot valves without removing the pump from service.
Port Size SB1: 

1″ NPT

SB25: 

1″ BSP (Tapered)

Capacity  0 to 42 gpm (159 lpm)
Air Distribution Valve No-lube, no-stall design
Solids-Handling Up to ¼” (6.3 mm)
Heads Up To  125 psi or 289 ft. of water (8.6 bar or 88 meters)
Displacement/Stroke  .09 gallons (.34 liters)
Max Operating Pressure  125 psi (8.6 bar)
Shipping Weight  Aluminum: 

31 lbs (14 kg)

Stainless Steel: 

45 lbs (20 kg)

Alloy C: 

45 lbs (20 kg)

Stainless Steel with Cast Iron Center: 

65 lbs (30 kg)

Alloy C with Cast Iron Center:

65 lbs (30 kg)