Gamajet AST cleaning system for 360-degree high-impact cleaning and non-entry sludge removal in aboveground storage tanks

IntroductionTechnicalDownload

AlphaJETFull-Coverage AST Cleaning

Today’s fuels are less stable and breakdown over time, allowing contaminants to thrive in storage tanks. Without proper cleaning, tanks are susceptible sludge buildup, loss of capacity and contamination. In addition, tanks must be cleaned prior to inspection, maintenance, decommissioning, transportation as well as any product changeover. With the AlphaJET system, you can clean an entire AST in minutes, while purifying the fuel.

The AlphaJET System utilizes an AlphaFP which can fit through a standard 2” (50 mm) opening. In using Gamajet’s rotary impingement tank cleaning, the AlphaJET will clean thoroughly clean tanks up to 1,250 gallons (4,750 l) in capacity, from one inlet. Snaking or cutting and entry often fail to clean the top-half of the tank.

The system is designed to utilize the diesel or other class II fuels as the cleaning agent, therefore requiring no water. Equipped with a series of filters, the system will capture all bulk sludge as well as the finer particulates, therefore leaving both a clean tank and polished fuel. This system is not to be used with water or Gasoline.

Cleaning above ground fuel storage
tanks up to 1250 gallons (4735 l) in
capacity. Fitting through a standard 2”
(50 mm) opening.

Gamajet System for AST Cleaning Application

Benefit :

  • Fast: Clean any AST in minutes
  • Fit through standard 2” (50mm) opening
  • Clean the entire AST, including the top
  • No waste: Uses the fuel to clean
  • Polishes the fuel while cleaning
  • Components:
    • Gamajet AlphaFP
    • Cart
    • Pressure boosting pump for supply and discharge
    • Three (3) Filters for polishing
    • 2 Suction and Discharge Hoses- 15′ Long
  • Operating Range
    • Pressure: 60-70 psi (4-5 bar)
    • Temperature: 32° to 180°F (0° to 82°C)
    • Flow Rate: 6-20 gpm (23-76 lpm)
    • Cleaning Radius:10′ (3 Meters)
    • Wash Cycle Time: 3-20 Minutes
    • Impact: 7 lbs (3 kg) at 5′ (1.5 m)
  • Features
    • Pump/Motor110V Electric XP (<20 amp) or 4.5 HP Gas Driven Motor
    • Self Priming Pump Gear
    • Filtration
    • Basket Strainer (Reusable – for Sludge)
    • RCI Purifier (Reusable)
    • Micron Cartridge Filter (Disposable)
  • Overall Dimensions
    • Cart 1: 50”x41”x52”H (1.25×1.05×1.32H m)
    • Weight: Approx. 450 lbs (200 kg)

How it Works:

AlphaJETPushtoplay

Class II fuel and sludge are suctioned from the tank through a hose, by the pressure boosting pump, and passed through a series of filters to remove the sludge and particulates, producing a polished fuel which then continues through the pump and the AlphaFP on to the tank walls, blasting residue from the surface in a precise global-indexing pattern, creating a closed loop cleaning circuit with a cycle time of 3-7 minutes. Note: Discharge Container For Sludge (Recommended not Included)

Brochure-GamajetFuelstorageSmall

Cleaning ASTs should not risk safety or downtime. The Gamajet system removes sludge fast with zero entry. Reach out to us for a safer, cleaner solution