Fimett Magnetic
Design FeatureModels & DescriptionDownload
Motor
- Direst starting motor
- IEC Standard
Mounting Bracket
- Strong mounting Bracket for stable performance
Impeller Rear-Support
- Extra impeller rear-support for stable performance; reduce effects of cavitation; improve heat transfer
- Wet and catridge-modular designs, allows low cost replacements impeller, trust bearing, shaft, impeller rear-support shaft bearing…..
Impeller
- Oversized axial thrust washer
- Modular impeller allows for modifying performances
Rear Casing and shaft
- Strong casing tested with 20 bar performance
- Oversized shaft for stable performance, available in silicone Carbide & 99.7% pure alumina ceramic
- Non-metallic reinforced polymer eliminates heat & efficiently losses
- Single (fully confined) O-ring for better sealing reliability
Casing
- Machined from solid block PP or PVDF with raised face flangers for superior performance & ensure zero leakage
- Heavy walled, machined construction provides for greater resistance to permeation and migration of corrosive
- Strong & thermal stability resists deformation & maximum chemical resistance
- Perfect design to mimise effect of cavitation
| Model | Max Flow (litres/min) |
Max Head (mtrs) | Motor Power (W) |
| PM4 | 54 | 7.5 | 0.12 |
| PM6-109 | 109 | 6.75 | 0.25 |
| PM10-183 | 183 | 10 | 0.55 |
| PM10-218 | 218 | 13.75 | 0.75 |
| PM15-270 | 270 | 10.25 | 1.1 |
| PM15-341 | 341 | 15 | 1.1 |
| PM15-391 | 391 | 20 | 1.5 |
| PM31-517 | 517 | 14.5 | 1.5 |
| PM31-550 | 550 | 20 | 2.2 |
| PM31-575 | 575 | 24 | 3.7 |
| PMCH 065-50 | 600-783 | 21-34 | 2.2-3.7 |
| PMCH 080-65 | 966-1500 | 18-36.5 | 3.7-7.5 |
| PMCH 100-80 | 183-2200 | 28-48 | 7.5-15 |
Brochure:
Fimett Magdrive Series Fimett Magnetic SeriesPerformance Curve:
MP-6R to MP-20R MP-30R to MP-100R MP-120R MPH-400CV5 MPH-401CV5 MPH-422CV5 MPH-423CV5Manuals:
Magdrive Instruction Magnetic Instruction