Optimize your tank cleaning processes with the Alfa Laval PlusClean cleaning nozzle. Contact us today to learn more or request a quote!
The Alfa Laval PlusClean cleaning nozzle makes hygienic tank cleaning an easy task. If you already have tank cleaning equipment mounted on top of your tank, the PlusClean will slot right in with no problem. When the Cleaning-in-Place (CIP) mode is activated, a fan is used to spray pressured cleaning medium into hard to reach areas. By doing so, you can be certain that every surface will be spotless, while also reducing your water and cleaning chemical use by as much as 80%.
To ensure the effectiveness of your sanitation processes, carefully clean the tank to remove any potential impurities. Alfa Laval’s cleaning nozzle is simple to install and eliminates practically all potential sources of contamination in your process tanks. When compared to tank cleaning devices positioned on top, the PlusClean’s optimised, high-impact spray pattern thoroughly cleans even the most inaccessible regions, such as beneath agitator blades, coils, and connections. Batch or continuous process productivity in the food, beverage, and personal care sectors can now be boosted by using faster and safer contaminant-free changeovers. The end result is a lower total cost of ownership, a faster return on investment and a higher product yield.
Beverage Processing, Biotechnology, Food Processing, Home Care, Personal Care and Pharmaceutical Production
Whether it’s a static spray ball, rotary spray head, or rotary jet head, the PlusClean® improves the cleaning effectiveness of the main cleaning equipment. Depending on the general design of your tank, you can install the cleaning device on the tank bottom or on the tank wall. You can customise your cleaning tool by choosing from three spray patterns and two mounting options (weld plates).
In addition to the standard type, which employs cleaning medium to operate a piston, the Alfa Laval PlusClean® also comes in a pneumatic variation. The pneumatic variation uses a controlled amount of air pressure to operate the piston. When used in conjunction with the Alfa Laval ThinkTop, you can observe the entire tank cleaning process, including feedback signals such as open/closed and the purging option.
You can rely on your equipment to last longer and function more efficiently because of its low-wear components, which are simple to replace on-site and save downtime. The PlusClean® cleaning tool contains no retractable or extended components. Genuine Alfa Laval parts are long-lasting and dependable; they not only perform brilliantly, but they also lower your total cost of ownership and retain the value of your equipment during its lifespan.
The suggested installation method for Alfa Laval PlusClean® cleaning equipment is flush with the tank wall and/or bottom. In response to either the cleaning media or regulated air pressure, the equipment produces a forceful impact, propelling the cleaning media in a fan pattern directly onto the filthy surface. Rotating the shaft and agitator blades repeatedly and with control ensures thorough cleaning.
After the cleaning cycle, the built-in spring mechanism returns the piston to its original position, ensuring that the cleaning device is securely closed and sealed. Make careful to utilise the actuator whenever purging is needed.
How to assemble the Alfa Laval PlusClean Video
How to disassemble the Alfa Laval PlusClean Video
Alfa Laval PlusClean product leaflet
Optimize your tank cleaning processes with the Alfa Laval PlusClean cleaning nozzle. Contact us today to learn more or request a quote!