Alfa Laval i-CP2000 Centrifugal Pump
Alfa Laval i-CP2000 Centrifugal Pump
Alfa Laval’s i-Series Centrifugal Pumps are an ideal choice for most standard duties, securing effective yet gentle liquid transfer. Alfa Laval’s decades of pump design expertise, allows Alfa Laval to offer a solution that has easy cleaning, simplified maintenance, and low cost of ownership in the long term. They are EHEDG-compliant and come with FDA-approved elastomers.
The Alfa Laval i-CP2000 pump is an economical centrifugal pump that addresses the sensitive product transfer and chemical resistance requirements in hygienic applications. The pump is available in six sizes;
- i-CP2010
- i-CP2-2020
- i-CP2025
- i-CP2035
- i-CP2040
- i-CP2050
Alfa Laval Centrifugal Pump i-CP2000
The i-CP2000 features a patented shaft seal arrangement. It also has the same volute pump casings and computer-design impellers as the premium range pumps, ensuring high efficiency and gentle product transfer.
- A cost-effective product range of centrifugal pumps
- Robust design made for cost-effectiveness, simple maintenance and precise production.
- Reliable performance in a diverse range of application
- Energy-efficient application
Applications
Alfa Laval i-CP2000 pump is an economical centrifugal pump that addresses the sensitive product transfer and chemical resistance requirements in hygienic applications. The pump is available in six sizes, which Alfa Laval i-CP2010, i-CP2020, i-CP2025, i-CP2035, i-CP2040, i-CP2050.
Standard Design
Alfa Laval i-CP2000 pump consists of a standard engine, shaft, mechanical packing, adapter, rear plate, propeller, pump body and shaft gasket. To allow easy CIP the pump has been configured with fans with wide radii and easy-to-clean gaskets. The pump engine protection is stainless steel and the body is supported with four adjustable pillars.
Shaft Gaskets
Alfa Laval i-CP2000 centrifugal pump is available with single or double mechanical packing. All moving parts in the packing are AISI316L quality stainless steel and sealing is silicon carbide. Fixed gaskets may be carbon or optionally silicone carbide. Packings with cooling water option (flush) have a secondary gasket.
Material
| Product wetted steel parts | AISI 316L |
| Other steel parts | AISI 304 |
| Product wetted seals | EPDM, Nitrile (NBR), Fluorinated rubber (FPM) |
| Outside finish | Semi-bright |
| Inside finish | Ra < 1.6 ?m |
Technical Data
| Maximum flow rate | 140 m³/hour |
| Maximum discharge pressure | 80 mmWc |
| Maximum inlet pressure | 500 kPa (5 bar) |
| Temperature range | -10°C to +140°C (EPDM) |