Sandpiper GH2-M Metallic GODD High Pressure Pump
DescriptionFeaturesSpecifications

Sandpiper’s GODD Pump, Gas-Operated Double-Diaphragm Pump, the GH2-M (High Pressure Pump) 

Sandpiper GH2-M Metallic GODD High Pressure Pump

Sandpiper’s GODD Pump, the GH2-M is a natural gas-operated high pressure pump that offers a robust construction for demanding oil and gas applications, such as condensate injection and long discharge runs of pipe. The high pressure pump utilizes its thick wall castings in stainless steel and cast iron, the G-Series Pumps by Sandpiper are created to handle natural gas while allowing for complete ground-ability. Sandpiper partnered with the Canadian Standards Association (CSA®) to lead the development of the first-ever safety certification for gas-operated pumps. The inherent danger in this application is the potential for static electricity build up due to material and product movement which the release of these static discharge in these applications could lead to a sparking which in turn could lead to a flash fire and possible explosion. The CSA specification sets standards to prevent static electricity accumulations as well as standards for burst pressure; heat resistance, leakage and upper and lower temperature operation.

Sandpiper’s Metallic GODD Pump, the GH2-M, the high pressure pump has a variety of highlighted features that showcases the GODD pump’s advantages in its industrial applications. Amongst the highlighted features;

  • Safely powered by compressed air or natural gas depending on the application. Dual power capabilities offers simplified purchasing, maintenance and training while reducing inventory.
  • Elastomeric seals are compatible with the various chemicals normally expected to be found in sweet and sour gas.
  • Every pump is leak-factory tested to 150 psi to ensure natural gas emission are properly contained.
  • Complies with NACE Standard MR0175/ISO15156 for corrosion resistance.
  • Constructed to prevent accumulation of static electric charge and fully ground-able to ensure static electricity dissipation (comes standard with attached grounding strap)
  • Hydrostatic strength tested pressure to 500 psi (five times the maximum operating pressure, the highest standard in the industry;
    • Canadian Technical Letter R-14 requires 500 psi
    • ANSI LC6 requires 400 psi
    • Hydraulic Institute requires 188 psi
Port Size 2″ NPT
Capacity 0 to 74  gpm (280 lpm)
Air Distribution Valve No-lube, no-stall design
Solids-Handling  Up to .25″ (6 mm)
Heads Up To 250 psi or 577 ft. of water (17 bar or 176 meters of water)
Max Operating Pressure 125 psi (8.6 bar)
Displacement/Stroke  .36 gallons (1.3 liters)
Shipping Weight Cast Iron; 

172 lbs (78 kg)

316 Stainless Steel: 

176 lbs (87 kg)